| 含多粗糙峰涂层等效应力的有限元分析 |
| |
| 引用本文： | 徐中,王岳峰,仲强,王磊,徐文骥. 含多粗糙峰涂层等效应力的有限元分析[J]. 机械工程学报, 2011, 47(15). DOI: 10.3901/JME.2011.15.101 |
| |
| 作者姓名： | 徐中 王岳峰 仲强 王磊 徐文骥 |
| |
| 作者单位： | 大连理工大学机械工程学院 大连 116024 |
| |
| 基金项目： | 国家自然科学基金(90923022,51075052); 大连市科技计划(2008A14GX242)资助项目 |
| |
| 摘 要： | 研究刚性平面与含粗糙峰涂层在二维与三维模型下的弹性接触问题,采用有限元法分析涂层弹性模量比、涂层厚度、粗糙峰间距、刚性平面压下深度对涂层粗糙峰表面、涂层/基体界面分布及基体等效应力分布的影响。计算结果表明压下深度对三维涂层粗糙峰表面最大应力的影响最大,涂层厚度、涂层/基体弹性模量比、粗糙峰间距的变化对应力值影响逐渐减小;增大涂层厚度、减小压下深度和粗糙峰间距、降低弹性模量比会使得三维接触模型最大等效应力值显著降低;增加涂层粗糙峰数和涂层厚度、同时降低涂层弹性模量有助于提高涂层/基体界面结合强度。相对于二维接触模型来说三维接触模型在粗糙峰表面的等效应力增大,造成这种变化的主要原因是由于涂层表面粗糙峰之间的等效应力叠加引起的。该研究为涂层粗糙峰及涂层/基体界面强度的应力分析提供依据。
|
| 关 键 词： | 表面粗糙峰 等效应力 有限元法 涂层 三维 |
Finite Element Analysis for the Equivalent Stress on Multi-asperity Coating |
| |
| XU Zhong,WANG Yuefeng,ZHONG Qiang,WANG Lei,XU Wenji. Finite Element Analysis for the Equivalent Stress on Multi-asperity Coating[J]. Chinese Journal of Mechanical Engineering, 2011, 47(15). DOI: 10.3901/JME.2011.15.101 |
| |
| Authors: | XU Zhong WANG Yuefeng ZHONG Qiang WANG Lei XU Wenji |
| |
| Affiliation: | XU Zhong WANG Yuefeng ZHONG Qiang WANG Lei XU Wenji(School of Mechanical Engineering,Dalian University of Technology,Dalian 116024) |
| |
| Abstract: | The elastic contact models for two-dimensional and three-dimensional multi-asperity coating surface with rigid plane are studied.The changes of elastic modulus ratio,coating thickness,spacing of asperity and indentation depth are studied for the stress distribution on asperity surface,coating/substrate interface and substrate surface by using finite element method.The results show that the indentation depth has the greatest influence on the maximum surface stress of 3D coating asperity.The influence of coat... |
| |
| Keywords: | Surface asperities Equivalent stress Finite element method Coatings Three dimensional |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
