| 高压凝固Al—17Zn-1．5Mg合金组织与显微硬度 |
| |
| 引用本文： | 王振玲,于玉城,魏尊杰.高压凝固Al—17Zn-1．5Mg合金组织与显微硬度[J].黑龙江科技学院学报,2009,19(5):339-341. |
| |
| 作者姓名： | 王振玲 于玉城 魏尊杰 |
| |
| 作者单位： | 1. 黑龙江科技学院,材料科学与工程学院,哈尔滨,150027
2. 哈尔滨工业大学,材料学院,哈尔滨,150001 |
| |
| 摘 要： | 利用扫描电镜、X射线衍射仪和显微硬度计对常压及6GPa高压下凝固的Al-17Zn-1．5Mg合金的组织和显微硬度进行了研究。结果表明，Al-17Zn-1．5Mg合金在常压凝固条件下，由α-A1相和MgZn2相组成，其中α—Al相长成粗大的枝晶，大量针状第二相位于枝晶间位置，相互连接形成网络状。当该合金在6GPa高压下凝固时，枝晶组织显著细化，第二相尺寸减小、数量减少，形态变成点粒状。合金高压凝固后，显微硬度增加了21％。
|
| 关 键 词： | Al-17Zn-1.5Mg合金 高压凝固组织 显微硬度 |
Microstructure and microhardness of high pressure solidification Al-17Zn-1.5Mg alloy |
| |
| WANG Zhenling,YU Yucheng,WEI Zunjie.Microstructure and microhardness of high pressure solidification Al-17Zn-1.5Mg alloy[J].Journal of Heilongjiang Institute of Science and Technology,2009,19(5):339-341. |
| |
| Authors: | WANG Zhenling YU Yucheng WEI Zunjie |
| |
| Affiliation: | WANG Zhenling,YU Yucheng,WEI Zunjie(1.College of Materials Science and Engineering,Heilongjiang Institute of Science and Technology,Harbin150027,China,2.College of Materials Science and Engineering,Harbin Institute of Technology,Harbin 150001,China) |
| |
| Abstract: | This paper is an effort to study the microstructure and the microhardness of Al-17Zn-1.5Mg alloy solidified at normal pressure and 6 GPa high pressure by using SEM, XRD and microhard- ness tester. The results show that Al-17Zn-1.5Mg alloy, subjected to normal pressure solidification condition consists of α - Al phase and MgZn2 phase, α - Al phase grows to be the coarsened dendrite, and many needle-like MgZn2 phases are located among the dendrite, linking together to form the reticulation. Solidifying the alloy at 6 GPa high pressure results in the size of the second phases, the reduced amount of them, and the under high pressure, the alloy shows the microhardness of up to obviously refined dendrites, the reduced graininess of morphology. After solidified 21%. |
| |
| Keywords: | Al-17Zn-1 5Mg alloy high pressure solidification microstructure microhardness |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
