首页 | 官方网站   微博 | 高级检索  
     

钨极氩弧焊逆变电源系统PI控制的Simulink仿真整定
引用本文:何建萍,孙广,张春波,吴毅雄,焦馥杰.钨极氩弧焊逆变电源系统PI控制的Simulink仿真整定[J].焊接学报,2004,25(5):99-103.
作者姓名:何建萍  孙广  张春波  吴毅雄  焦馥杰
作者单位:1. 上海交通大学,焊接工程研究所,上海,200030
2. 上海交通大学,焊接工程研究所,上海,200030;上海交通大学,金属基复合材料国家重点实验室,上海,200032
3. 上海工程技术大学,上海,200336
摘    要:钨极氩弧焊(GTAW)逆变电源系统是典型的大信号非线性系统,很难用线性化小信号的解析方法进行近似估计,作者利用Matlab中具有建模、分析和仿真等多功能的Simulink工具包,根据逆变电源的控制结构及GTAW电弧负载的特点,建立了由PI调节的GTAW逆变电源-电弧闭环系统的模型,在此基础上,进行了Simulink仿真研究,并进行了PI参数的调整。研究表明,PI调节的比例系数对系统的e动态响应有较大的影响,积分系数对消除系统的稳态误差起着较大的作用,同时,若这两个参数选择不当,将会造成系统的不稳定。

关 键 词:逆变电源  动态响应  仿真  PI调节器  钨极氩弧焊
文章编号:0253-360X(2004)05-99-05
收稿时间:2003/10/20 0:00:00

Parameters adjusting of PI control to GTAW inverter system based on simulink study
HE Jian-ping,SUN Guang,ZHANG Chun-bo,WU Yi-xiong and JIAO Fu-jie.Parameters adjusting of PI control to GTAW inverter system based on simulink study[J].Transactions of The China Welding Institution,2004,25(5):99-103.
Authors:HE Jian-ping  SUN Guang  ZHANG Chun-bo  WU Yi-xiong and JIAO Fu-jie
Affiliation:HE Jian-ping~1,SUN Guang~1,ZHANG Chnnbo~1,WU Yi-xiong~
Abstract:Gas tungsten arc welding (GTAW) inverter system is non-linear one with large signals that is difficurt to estimate by small-signal analytic methods. According to control structure of inverters and features of GTAW, a model of closed-loop system for GTAW inverter system has been developed by means of Matlab Simulink. The simulating study has been focused on the adjusting parameters of proportional integral (PI). The research indicated that the ratio coefficient of PI controller has a great effect on dynamic response of the system and its integral coefficient affects system' s steady-state error. Inproperly electing the two parameters will make the system unstability.
Keywords:inverter  dynamic response  simulation  proportional integral controller  gas tungsten arc welding
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《焊接学报》浏览原始摘要信息
点击此处可从《焊接学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号