首页 | 官方网站   微博 | 高级检索  
     

纳米SiO_2驻极体/聚乳酸复合熔喷非织造材料的制备及性能
引用本文:蔡诚,唐国翌,宋国林,赵亮,陈丽杰. 纳米SiO_2驻极体/聚乳酸复合熔喷非织造材料的制备及性能[J]. 复合材料学报, 2017, 34(3): 486-493. DOI: 10.13801/j.cnki.fhclxb.20160607.002
作者姓名:蔡诚  唐国翌  宋国林  赵亮  陈丽杰
作者单位:清华大学深圳研究生院新材料所, 深圳 518055
基金项目:深圳市科技计划技术开发项目,东莞市产学研合作项目,深圳市政府项目,深圳市国际合作研究项目
摘    要:采用纳米SiO_2为驻极体,经过表面改性与聚乳酸(PLA)复合,利用双螺杆挤出机制备了纳米SiO_2/PLA复合熔喷切片,并通过工业级熔喷生产线试制了纳米SiO_2/PLA复合熔喷非织造材料。利用FTIR分析了纳米SiO_2的表面改性效果,利用DSC分析了纳米SiO_2/PLA复合熔喷切片在熔喷快速冷却条件下的结晶性能,利用滤料综合性能测试台和SEM研究了纳米SiO_2/PLA复合熔喷非织造材料的过滤性能及微观形貌,最后采用质量损失法评估了纳米SiO_2/PLA复合熔喷非织造材料的降解性能。研究结果表明:经表面改性处理,纳米SiO_2表面附上了有机活性基团;在100℃/min的冷却条件下纯PLA的结晶分数较低,纳米SiO_2驻极体的加入有助于PLA的结晶;少量纳米SiO_2驻极体的添加可显著提高PLA复合熔喷非织造材料的过滤效率,其中质量分数0.75%的纳米SiO_2添加量可使过滤效率达到99.69%,接近商用高效空气过滤器(HEPA)级聚丙烯(PP)过滤效率;在中性水解环境下,纳米SiO_2/PLA复合熔喷非织造材料具备可降解性能,经8个月质量降解至79.57%。

关 键 词:聚乳酸  纳米SiO2驻极体  熔喷非织造材料  结晶分数  过滤性能  
收稿时间:2016-04-11

Preparation and properties of nano-SiO2 electret/PLA composite meltblown nonwovens
CAI Cheng,TANG Guoyi,SONG Guolin,ZHAO Liang,CHEN Lijie. Preparation and properties of nano-SiO2 electret/PLA composite meltblown nonwovens[J]. Acta Materiae Compositae Sinica, 2017, 34(3): 486-493. DOI: 10.13801/j.cnki.fhclxb.20160607.002
Authors:CAI Cheng  TANG Guoyi  SONG Guolin  ZHAO Liang  CHEN Lijie
Affiliation:Advanced Materials Institute, Graduate School at Shenzhen, Tsinghua University, Shenzhen 518055, China
Abstract:A kind of nano-SiO2/PLA meltblown chip, composited with the surface modified nano-SiO2 electret and PLA resin, was prepared by two-screw extruder.After meltblown manufacturing, the nano-SiO2/PLA compo-site meltblown nonwovens were obtained.FTIR testing was used to evaluate the effect of surface modification of nano-SiO2.DSC testing was used to investigate the crystallinity of nano-SiO2/PLA meltblown chips at fast cooling process like melt-blowing.Filter media testing platform and SEM testing were used to investigate the filtration property and micromorphology of the nano-SiO2/PLA composite meltblown nonwovens respectively.The mass loss method was used to evaluate the degradation property of the nano-SiO2/PLA composite meltblown nonwovens in the end.The results show that after modification the surface of nano-SiO2 has been covered with organic functional groups.At 100℃/min cooling rate, the crystallinity of neat PLA is quite low while adding nano-SiO2 electret can remarkably improve it.A small amount addition of nano-SiO2 electret can notably enhance the filtration efficiency of PLA composite meltblown nonwovens, as the composite with 0.75 wt% nano-SiO2 has a high filtration efficiency of 99.69%, which is close to the commercialized high efficiency particulate air filter (HEPA) level PP product.The nano-SiO2/PLA composite meltblown nonwovens are degradable at neutral hydrolysis condition, of which the mass drop to 79.57% after 8 months degrading.
Keywords:poly (lactic acid)  nano-SiO2 electret  meltblown nonwovens  crystallinity  filtration property
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《复合材料学报》浏览原始摘要信息
点击此处可从《复合材料学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号