| 激光重熔和时效处理的Co基合金堆焊层组织和性能 |
| |
| 引用本文： | 洪永昌,王明辉. 激光重熔和时效处理的Co基合金堆焊层组织和性能[J]. 材料热处理学报, 2011, 32(3) |
| |
| 作者姓名： | 洪永昌 王明辉 |
| |
| 作者单位： | 安徽工业大学材料科学与工程学院,安徽,马鞍山,243002;安徽省高校金属材料与加工重点实验室,安徽,马鞍山,243002 |
| |
| 基金项目： | 安徽省教育厅自然科学研究项目 |
| |
| 摘 要： | 利用金相显微镜、扫描电镜、透射电镜、X射线衍射物相分析和显微硬度、耐磨性测定等试验手段,对激光重熔及经不同时效工艺处理后的Co基合金堆焊层显微组织、相结构、显微硬度及高温耐磨性能进行了分析研究.结果表明,经激光重熔后,Co基合金堆焊层的组织得到明显细化,硬度和耐磨性都得到提高;重熔堆焊层的组织主要由γ-Co和Cr7C3、Cr23C6等强化相组成.经时效处理后的重熔堆焊层的硬度不但明显得到提高而且耐磨性均优于原始堆焊层.相比较,经900 ℃×6 h时效处理后的重熔堆焊层耐磨性最好.
|
| 关 键 词： | 时效处理 激光重熔 Co基合金 组织 性能 |
Microstructure and properties of Co-base alloy hardfacing layer by laser remelting and aging treatment |
| |
| HONG Yong-chang,WANG Ming-hui. Microstructure and properties of Co-base alloy hardfacing layer by laser remelting and aging treatment[J]. Transactions of Materials and Heat Treatment, 2011, 32(3) |
| |
| Authors: | HONG Yong-chang WANG Ming-hui |
| |
| Affiliation: | HONG Yong-chang1,2,WANG Ming-hui1,2(1.School of Material Science and Engineering,Anhui University of Technology,Ma'anshan 243002,China,2.Anhui Provincial Key Laboratory of Metal Metal Material and processing,China) |
| |
| Abstract: | Microstructure,phases,microhardness and high temperature wear resistance of Co-base alloy hardfacing layer on a low carbon steel after laser remelting and aging treatment were studied by means of optical microscopy,scanning electron microscopy,transmission electron microscopy,X-ray diffraction,microhardness and wear resistance tests.The results show that microstructure of Co-based alloy hardfacing layer is significantly refined and its hardness,wear resistance is improved after laser remelting.The microstru... |
| |
| Keywords: | aging treatment laser remelting Co-based alloy microstructure property |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
