Electrostatic charge and field sensors based on micromechanical resonators

We have developed highly sensitive electrometers and electrostatic fieldmeters (EFMs) that make use of micromechanical variable capacitors. Modulation of the input capacitance, a technique used in macroscale instruments such as the vibrating-reed electrometer and the field-mill electrostatic voltmeter (ESV), moves the detection bandwidth away from the 1/f-noise-limited regime, thus improving the signal-to-noise ratio (SNR). The variable capacitors are implemented by electrostatically driven resonators with differential actuation and sensing to reduce drive-signal feedthrough. The resonators in the electrometer utilize a balanced comb structure to implement harmonic sensing. Two fabrication methods were employed - a hybrid technology utilizing fluidically self-assembled JFETs and SOI microstructures, and an integrated process from Analog Devices combining 0.8-/spl mu/m CMOS and 6-/spl mu/m-thick polysilicon microstructures. All devices operate in ambient air at room temperature. Measured data from one electrometer with an input capacitance of 0.7 pF indicates a charge resolution of 4.5 aC rms (28 electrons) in a 0.3 Hz bandwidth. The resolution of this electrometer is unequaled by any known ambient-air-operated instrument over a wide range of source capacitances. The EFM has a resolution of 630 V/m, the best reported figure for a MEMS device.