Adsorption properties of carbon molecular sieves prepared from an activated carbon by pitch pyrolysis

In this study a heat-treatment process using an activated carbon and coal-tar pitch was developed to prepare carbon molecular sieves (CMSs) for CH₄/CO₂ separation. This process results in a partial blockage of the pores of the activated carbon precursor, so that a reduction in the pore size takes place. Equilibrium CO₂ adsorption measurements at different temperatures, and CO₂ and CH₄ kinetic measurements at different temperatures and feed pressures were carried out using the TEOM technique for a carbon molecular sieve (CMS) prepared by this process (sample CB3) and a commercial CMS (Takeda 3A, sampleT3A). The overall diffusion for CO₂ in sample CB3 was faster than that in T3A and a slightly higher CO₂ adsorption capacity of CB3 was obtained. The transient uptake profiles in both samples at different temperatures and different CO₂ partial pressures were described in some cases by a micropore diffusion model, and in other cases by a dual resistance model. Both equilibrium and kinetic results demonstrate a better CO₂/CH₄ separation performance for the CMS prepared in the present study (CB3) than for the commercial CMS (Takeda 3A), due to the existence of slightly wider pore-mouth openings in sample CB3. This study demonstrates that the process used in this work is an interesting and reproducible approach to prepare CMS for CO₂/CH₄ separation.