| LCM工艺实时监测技术的影响因素 |
| |
| 引用本文： | 段跃新,孙玉敏,谭朝元,张佐光. LCM工艺实时监测技术的影响因素[J]. 复合材料学报, 2006, 23(5): 89-95 |
| |
| 作者姓名： | 段跃新 孙玉敏 谭朝元 张佐光 |
| |
| 作者单位： | 北京航空航天大学,材料科学与工程学院,北京,100083;北京航空航天大学,材料科学与工程学院,北京,100083;北京航空航天大学,材料科学与工程学院,北京,100083;北京航空航天大学,材料科学与工程学院,北京,100083 |
| |
| 摘 要： | 为了提高复合材料液体成型(LCM) 工艺构件的质量稳定性和降低成本, 建立了直流电实时监测系统。实验表明, 该监测系统能够准确地反映监测点处树脂流动前锋的到达及其固化过程。研究了主要工艺因素对监测信号的影响规律, 发现系统对不同的树脂体系的响应差别较大, 监测饱满值随工艺温度的升高而增大, 随监测铜丝裸露长度的增加而增大, 纤维体积含量和纤维铺放角度对监测信号的影响不大。
|
| 关 键 词： | 复合材料 液体成型 固化 实时监测 |
| 文章编号： | 1000-3851（2006）05-0089-07 |
| 收稿时间： | 2005-09-19 |
| 修稿时间： | 2005-09-192006-06-05 |
Factors of real time monitoring technology for LCM process |
| |
| DUAN Yuexin,SUN Yumin,TAN Zhaoyuan,ZHANG Zuoguang. Factors of real time monitoring technology for LCM process[J]. Acta Materiae Compositae Sinica, 2006, 23(5): 89-95 |
| |
| Authors: | DUAN Yuexin SUN Yumin TAN Zhaoyuan ZHANG Zuoguang |
| |
| Affiliation: | School of Materials Science and Engineering| Beijing University of Aeronautics and Ast ronautics| Beijing 100083| China |
| |
| Abstract: | A real time monitoring system for Liquid Composites Molding(LCM) process based on the directcur-rent principle was established to improve quality stability of products and make the process cost-efficient.The experi-ments indicate that the monitoring system can precisely reflect the resin flow front arrival and curing course of resin on the inspecting spot.The main process factors' effects on the monitoring signal were studied.The experimental results show that different resin systems have distinct responses to the monitoring signal.The monitoring saturation value increases with the increase of temperature and the brass wires' bare length respectively.The fiber volume fraction and laying angle of fibers have neglectable effects on the monitoring signal. |
| |
| Keywords: | composites LCM curing real time monitoring |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《复合材料学报》浏览原始摘要信息 |
|
点击此处可从《复合材料学报》下载免费的PDF全文 |
|
