|
|||||
|
|
| 2.25Cr1Mo钢试块缺陷的超声TOFD检测 | |
| 引用本文： | 徐书根,王威强,宋明大,李梦丽,赵冰.2.25Cr1Mo钢试块缺陷的超声TOFD检测[J].无损检测,2007,29(11):627-629. |
| 作者姓名： | 徐书根 王威强 宋明大 李梦丽 赵冰 |
| 作者单位： | 1. 山东大学,机械工程学院,济南,250061 2. 山东大学,机械工程学院,济南,250061;山东省特种设备检验研究院,济南,250013 3. 兖矿峄山化工有限公司,山东邹城,273500 |
| 基金项目： | 国家高技术研究发展计划(863计划) |
| 摘 要： | 基于超声TOFD技术检测缺陷位置和尺寸的原理,应用多通道超声TOFD检测系统检测了110 mm厚的2.25Cr1Mo钢试块中的横孔和切槽,给出了试块的D扫描和A扫描图像,分析了两者的对应关系.试验结果表明,缺陷位置和尺寸的误差＜5%,验证了超声TOFD方法在缺陷定位和定量上具有较高的准确性.为应用超声TOFD设备进行现场检测时获得的自然缺陷图像的评定提供了有效的依据. |
| 关 键 词： | 超声TOFD检测 横孔 切槽 定位 定量 |
| 文章编号： | 1000-6656(2007)11-0627-02 |
| 修稿时间： | 2007年7月10日 |
Detecting of the Defects in 2. 25Cr1Mo Steel Block by Ultrasonic TOFD Technique |
|
| XU Shu-gen,WANG Wei-qiang,SONG Ming-da,LI Meng-li,ZHAO Bing.Detecting of the Defects in 2. 25Cr1Mo Steel Block by Ultrasonic TOFD Technique[J].Nondestructive Testing,2007,29(11):627-629. | |
| Authors: | XU Shu-gen WANG Wei-qiang SONG Ming-da LI Meng-li ZHAO Bing |
| Abstract: | Based on the principle of ultrasonic TOFD technique for the detection,location and sizing of defects,the side drilled holes and notches in a 2.25Cr1Mo steel block of 110 mm in thickness were inspected using a multi-channel TOFD inspection system.The D scan and A scan images of defects were given.The corresponding relationship between D scan and A scan image was also analyzed.The errors of defects location and size were no more than 5%.The result validated the good measurement accuracy of ultrasonic TOFD testing.Thus,criterion was provided efficiently for evaluation of natural defect images examined by ultrasonic TOFD equipment on site. |
| Keywords: | Ultrasonic TOFD testing Side drilled hole Notch Location Sizing |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |
