A CTOD equation based on the rigid rotational factor with the consideration of crack tip blunting due to strain hardening for SEN(B)

Crack tip opening displacement (CTOD) from national and international standards was shown to give different values. This paper investigates the feasibility of CTOD determined based on the concept of rigid rotational factor in single‐edge notched bend (SENB) specimens. Based on validated modelling methods, finite element (FE) models were simulated for crack ratios 0.3 ≤ a₀/W ≤ 0.7 and yield‐to‐tensile ratio 0.44 ≤ σ_ys/σ_uts ≤ 0.98. This covers cases of shallow to deeply cracked specimens and a wide range of strain hardening properties. CTOD obtained from the FE models was used as the basis of a newly implemented strain hardening corrected rotational factor, which considers the effects of crack tip blunting due to strain hardening, r_{p sh}. An improved equation considering strain hardening was implemented based on the r_{p sh}. The equation gives accurate estimation of CTOD from the FE models compared with the equation from BS 7448‐1, ASTM E1820, and WES 1180.