| 多道次拉深复合成形工艺研究 |
| |
| 引用本文： | 陈文琳,路遥,彭李静,刘桥求,吴义华.多道次拉深复合成形工艺研究[J].金属成形工艺,2011(1):23-26. |
| |
| 作者姓名： | 陈文琳 路遥 彭李静 刘桥求 吴义华 |
| |
| 作者单位： | 合肥工业大学材料科学与工程学院,合肥230009 |
| |
| 摘 要： | 以典型深拉深件滤清器罩壳为研究对象，对其原有成形工艺方案进行分析，提出采用多道次拉深挤切复合成形的工艺方案，设计出了集落料、拉深、修边、整形于一体的复合成形模具。提高了生产效率和生产安全性，降低了生产成本。
|
| 关 键 词： | 深拉深件 多道次拉深 复合成形 |
Research on Multi-stage Compound Forming Process of Deep Drawing Parts |
| |
| CHEN Wen-lin,LU Yao,PENG Li-jing,LIU Qiao-qiu,WU Yi-hua.Research on Multi-stage Compound Forming Process of Deep Drawing Parts[J].Metal Forming Technology,2011(1):23-26. |
| |
| Authors: | CHEN Wen-lin LU Yao PENG Li-jing LIU Qiao-qiu WU Yi-hua |
| |
| Affiliation: | (School of Material Science and Engineering, Hefei University of Technology, Hefei 230009, China) |
| |
| Abstract: | The typical deep drawing part of filter cover is taken as an example in this paper. The original forming process scheme was analyzed, and a combined forming process of multi stage drawing and extrusion in one step was put forward. Based on this, the compound die with blanking, drawing, trimming, and shaping was designed and put into practice, qualified products were obtained, which greatly increased the production efficiency, improved the production security, reduced the production cost, and also the compound die provideds certain reference for the forming of similar pressing parts. |
| |
| Keywords: | deep drawing part multi-stage drawing compound forming |
| 本文献已被 维普 等数据库收录！ |
|
