| 小型H型钢斜轧孔型工艺的全轧程有限元模拟分析 |
| |
| 引用本文： | 郭星晔,朱国明,吕超,张思勋,王中学,刘福宁,康永林.小型H型钢斜轧孔型工艺的全轧程有限元模拟分析[J].金属成形工艺,2011(6):102-106. |
| |
| 作者姓名： | 郭星晔 朱国明 吕超 张思勋 王中学 刘福宁 康永林 |
| |
| 作者单位： | [1]北京科技大学材料科学与工程学院,北京100083 [2]莱芜钢铁集团有限公司,山东莱芜271104 |
| |
| 摘 要： | 采用显示动力学有限元模拟软件LS-Dyna,对某钢厂的小型H型钢的完全轧制过程进行模拟仿真分析。重点分析了有限元模型建立过程中单元的选择、网格的划分、材料模型的构建和前处理边界条件的设定;通过数值模拟分析得到了该型号H型钢的全轧程各道次的应力应变状态,并分析了金属的流动和轧制过程中金属的充型状态,为小型H型钢的轧制工艺的制定和孔型设计提供了参考。
|
| 关 键 词： | 小型H型钢 斜轧孔型 有限元法 数值模拟 |
Simulation of Incline Rolling Groove for Small H-beam in Full Rolling Process |
| |
| GUO Xing-ye,ZHUGuo-ming,LVChao,ZHANG Si-xun,WANG Zhong-xue,LIU Fu-ning,KANG Yong-lin.Simulation of Incline Rolling Groove for Small H-beam in Full Rolling Process[J].Metal Forming Technology,2011(6):102-106. |
| |
| Authors: | GUO Xing-ye ZHUGuo-ming LVChao ZHANG Si-xun WANG Zhong-xue LIU Fu-ning KANG Yong-lin |
| |
| Affiliation: | 1 (1. School of Material Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China; 2. Laiwu Iron ＆ Steel Co. , Ltd. , Laiwu 274404, China) |
| |
| Abstract: | Based on dynamic explicit finite element method and with software LS-Dyna, the full rolling process of small size H-beam was simulated. The choosing of elements type, the construction of the element nets, material model and the boundary condition were introduced in detail. The stress and strain status was derived from the calculation, and the current status of the iron and the metal filling condition were analyzed. This paper provides reference for the technology planning and the roller pass designing of H-beam rolling. |
| |
| Keywords: | small size H-beam incline rolling groove finite element method simulation |
| 本文献已被 维普 等数据库收录！ |
|
