| 脉冲电解和直流电解磨削加工的对比实验和研究 |
| |
| 引用本文： | 龚庆寿,吴安如. 脉冲电解和直流电解磨削加工的对比实验和研究[J]. 中国制造业信息化, 2002, 31(3): 80-81 |
| |
| 作者姓名： | 龚庆寿 吴安如 |
| |
| 作者单位： | 湖南工程学院,机械工程系,湖南,湘潭,411101 |
| |
| 摘 要： | 通过脉冲电解和直流电解磨削加工的工艺对比实验 ,其分析结果表明 ,脉冲电解磨削加工的工件尺寸精度高、表面质量好。同时还得到了电解参数对工件尺寸精度和表面粗糙度值的影响规律。选择脉冲电解磨削的电参数非常重要 ,其中电流密度有一个相对最佳的选择值
|
| 关 键 词： | 电脉冲 直流电 电解磨削 实验研究 |
| 文章编号： | 1007-9483(2002)03-0080-02 |
| 修稿时间： | 2001-11-14 |
Contrast Experiment and Research Between Ripple and Direct Current Electroanalysis Grinding |
| |
| GONG Qing-shou,WU An-ru. Contrast Experiment and Research Between Ripple and Direct Current Electroanalysis Grinding[J]. Manufacture Information Engineering of China, 2002, 31(3): 80-81 |
| |
| Authors: | GONG Qing-shou WU An-ru |
| |
| Abstract: | By contrast experiments and research between ripple and direct current electroanalysis grinding machining, the paper concludes that the former machining method makes part with high precision size and good surface quality. Meanwhile, it finds out electroanalysis parameters influencing workpiece size precision and surface roughness. It concludes that, choosing these parameters is very important of which current consistency has a relatively appropriate value. |
| |
| Keywords: | Electric Impulse Direct Current Electroanalysis Grinding Experiment Research |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
