首页 | 官方网站   微博 | 高级检索  
     

低频电磁场频率对ZL201合金组织的影响
引用本文:史立峰,赵大志,康皓,王平,路贵民,崔建忠.低频电磁场频率对ZL201合金组织的影响[J].铸造,2005,54(4):360-362.
作者姓名:史立峰  赵大志  康皓  王平  路贵民  崔建忠
作者单位:东北大学材料电磁过程研究教育部重点试验室,辽宁沈阳,110004
基金项目:国家高技术研究发展计划(863计划),辽宁省自然科学基金
摘    要:采用低频电磁铸造技术制备ZL201合金半固态坯料,研究了电磁场频率对合金微观组织的影响.结果表明,随着电磁场频率从10 Hz上升到30 Hz时,粗大枝晶组织被打碎,逐渐转变为分布均匀、细小的、棒状或蔷薇状非枝晶组织.当电磁场频率为30 Hz时,可以获得更加均匀、细小的非枝晶组织,适合于半固态二次加热和触变成形.

关 键 词:低频电磁铸造  半固态  ZL201合金  触变成形
文章编号:1001-4977(2005)04-0360-03
修稿时间:2004年9月14日

Effect of Low Electromagnetic Frequency on Microstructures of ZL201 Alloy
SHI Li-feng,ZHAO Da-zhi,KANG Hao,WANG Ping,LU Gui-min,CUI Jian-zhong.Effect of Low Electromagnetic Frequency on Microstructures of ZL201 Alloy[J].Foundry,2005,54(4):360-362.
Authors:SHI Li-feng  ZHAO Da-zhi  KANG Hao  WANG Ping  LU Gui-min  CUI Jian-zhong
Abstract:The semi-solid ZL201 alloys billets cast by low frequency electromagnetic casting(LFEC) technology,and the effects of electromagnetic frequency on microstructures were investigated.The results show that with the increase of electromagnetic frequency from 10 Hz to 30 Hz.the coarse dentritic microstructure is gradually broken up and turned into the homogeneous,fine,and short rod or rosette non-dentritic microstructure.When electromagnetic frequency is 30 Hz,the homogeneous,fine,and non-dentritic microstructure suitable for semi-solid reheating and thixo-forming can be successfully obtained.
Keywords:low frequency electromagnetic casting  semi-solid  ZL201 alloy  thixo-forming
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号