|
|||||
|
|
| SUS301L不锈钢电阻点焊工艺研究 | |
| 引用本文： | 丁成钢,史春元,都本刚,刘静,许有军,陈志强. SUS301L不锈钢电阻点焊工艺研究[J]. 热加工工艺, 2006, 35(11): 28-29 |
| 作者姓名： | 丁成钢 史春元 都本刚 刘静 许有军 陈志强 |
| 作者单位： | 1. 大连交通大学,材料科学与工程学院,辽宁,大连,116028 2. 大连交通大学,材料科学与工程学院,辽宁,大连,116028;大连机车厂,辽宁,大连,116000 3. 大连机车厂,辽宁,大连,116000 |
| 摘 要： | 研究了SUS301L不锈钢电阻点焊的工艺。结果表明：选用中等偏硬一些的焊接规范。可以获得较理想的点焊接头，接头的外观、平滑度及熔核尺寸和力学性能满足了相关标准的要求；待焊表面涂抹专用密封胶后．可形成结合线伸入缺陷，但对接头组织和力学性能影响不大。 |
| 关 键 词： | SUS301L不锈钢 电阻点焊 工艺 组织 力学性能 |
| 文章编号： | 1001-3814(2006)11-0028-02 |
| 收稿时间： | 2006-02-21 |
| 修稿时间： | 2006-02-21 |
Study on Spot Welding Process of Stainless Steel SUS301L |
|
| DING Cheng-gang,SHI Chun-yuan,DU Ben-gang,LIU Jing,XU You-jun,CHEN Zhi-qing. Study on Spot Welding Process of Stainless Steel SUS301L[J]. Hot Working Technology, 2006, 35(11): 28-29 | |
| Authors: | DING Cheng-gang SHI Chun-yuan DU Ben-gang LIU Jing XU You-jun CHEN Zhi-qing |
| Affiliation: | 1.College of Materials Science and Engineering, Dalian Jiaotong University, Dalian 116028,China; 2.Dalian Locomotive Factory ,Dalian 116000,China |
| Abstract: | Technology of stainless steel SUS301L spot welding was studied.The results show that the perfect joint welded is obtained by choosing suitable welding condition to meet requirement of Aspect;smoothness;nugget dimension and mechanical properties.Special glue is used on the surface of specimen ,forming welding defect,which has little influence on microstructure and mechanical properties of joint. |
| Keywords: | stainless steel SUS301L spot welding welding process microstructure mechanical properties |
| 本文献已被 维普 万方数据 等数据库收录！ | |
