| 采用硅烷黏结剂制备无铬锌铝涂层 |
| |
| 引用本文： | 乔维,蔡晓兰,李明明,王开军.采用硅烷黏结剂制备无铬锌铝涂层[J].电镀与涂饰,2010,29(12):61-63. |
| |
| 作者姓名： | 乔维 蔡晓兰 李明明 王开军 |
| |
| 作者单位： | 昆明理工大学冶金与能源工程学院,云南,昆明,650093;昆明理工大学冶金与能源工程学院,云南,昆明,650093;昆明理工大学冶金与能源工程学院,云南,昆明,650093;昆明理工大学冶金与能源工程学院,云南,昆明,650093 |
| |
| 摘 要： | 将硅烷偶联剂与有机树脂化学交联形成树脂聚合物,配制了无铬锌铝涂料。结果表明,当硅烷与树脂的质量比为1:7,黏结剂质量分数为30%时,膜层的耐蚀性能良好。
|
| 关 键 词： | 锌铝涂层 无铬 硅烷 黏结剂 耐蚀性 |
Preparation of non-chromium zinc-aluminum coating using silane as adhesive |
| |
| QIAO Wei,CAI Xiao-lan,LI Ming-ming,WANG Kai-jun.Preparation of non-chromium zinc-aluminum coating using silane as adhesive[J].Electroplating & Finishing,2010,29(12):61-63. |
| |
| Authors: | QIAO Wei CAI Xiao-lan LI Ming-ming WANG Kai-jun |
| |
| Affiliation: | QIAO Wei,CAI Xiao-lan,LI Ming-ming,WANG Kai-jun Faculty of Metallurgical , Energy Engineering,Kunming University of Science , Technology,Kunming 650093,China |
| |
| Abstract: | Resin polymer was formed by chemical cross-linking of silane coupling agent with organic resin,by which non-chromium zinc-aluminum coating was prepared.The results showed that when the mass ratio of silane coupling agent and organic resin is 1:7 and the adhesive content is 30wt%,the coating has good corrosion resistance. |
| |
| Keywords: | zinc-aluminum coating non-chromium silane adhesive corrosion resistance |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
