首页 | 官方网站   微博 | 高级检索  
     

用于牙种植的TiO_2/羟基磷灰石复合涂层材料的制备与表征
引用本文:曹郁,庞小峰,何从军,黄勇,杨野乔.用于牙种植的TiO_2/羟基磷灰石复合涂层材料的制备与表征[J].生命科学仪器,2010,8(5):56-59.
作者姓名:曹郁  庞小峰  何从军  黄勇  杨野乔
作者单位:电子科技大学、生命科学与技术学院,四川成都610054
摘    要:采用阳极氧化-电化学沉积方法在钛基材表面制备了牙种植材料TiO2/HA复合涂层,并与在相同条件下制备的单一羟基磷灰石涂层进行了比较。采用SEM、EDS、FTIR等技术对所得的涂层形貌和成分进行测试表征。结果表明,纯钛基材在5wt%HF电解液中,经过20V电压阳极氧化60min,形成了较为理想的TiO2纳米管阵列结构,再经过电流密度为0.85mA/cm2的电化学沉积后,获得了孔隙率较好的针状羟基磷灰石涂层。

关 键 词:牙种植材料  羟基磷灰石  TiO2纳米管  电化学沉积  阳极氧化

Fabrication and characterization of TiO2/HA composite coating of dental implant material
Cao Yu,Pang xiaofeng,He Congjun,Huang Yong,Yang Yeqiao.Fabrication and characterization of TiO2/HA composite coating of dental implant material[J].Life Science Instruments,2010,8(5):56-59.
Authors:Cao Yu  Pang xiaofeng  He Congjun  Huang Yong  Yang Yeqiao
Affiliation:(College of Life Science and Technology, University of Electronic Science and Technology of China, ChengDu, 610054, China )
Abstract:TiO2/hydroxyapatite composite coatings of dental implant material were fabricated on titanium substrate by anodic oxidation-electrochemical deposition. HA coating was prepared in the same conditions as comparison. The morphologies and the composition of the films were investigated by means of scanning electron microscope (SEM), EDS and FTIR. The results show that the desired TiO2 nanotube structure can be obtained by anode oxidation using 5wt% HF, voltage of 20V for 60 minutes on the surface of titanium and the better porosity needlelike HA coating can be obtained by electrochemical deposition under the current density of 0.85mA/cm^2.
Keywords:Dental implant material  Hydroxyapatite  TiO2-Nanotube  Electrochemistry deposition  Anodic oxidation
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号