| 挤出机螺杆直槽式屏障混炼元件的优化设计 |
| |
| 引用本文： | 梁基照.挤出机螺杆直槽式屏障混炼元件的优化设计[J].橡胶工业,2006,53(11):684-687. |
| |
| 作者姓名： | 梁基照 |
| |
| 作者单位： | 华南理工大学,工业装备与控制工程学院,广东,广州,510640 |
| |
| 基金项目： | 致谢：华南理工大学工控专业2001级本科生吕云凤同学参与了本课题的部分工作,谨表谢意. |
| |
| 摘 要： | 研究挤出机螺杆直槽式屏障混炼元件的优化设计问题。根据粘性流体流动基本方程。以单位产量能耗最小为优化目标,建立简化的挤出机螺杆直槽式屏障混炼元件优化设计的数学模型，并应用复合形法求解，确定剪切长度、剪切问隙、屏障长度和屏障槽数等主要几何参数。本研究优化结果均在文献所建议的最佳取值范围内。
|
| 关 键 词： | 挤出机 螺杆 直槽式屏障混炼元件 优化设计 |
| 文章编号： | 1000-890X(2006)11-0684-04 |
| 收稿时间： | 06 2 2006 12:00AM |
| 修稿时间： | 2006年6月2日 |
Optimal design of Moddock barrier mixing element on extruder screw |
| |
| LIANG Ji-zhao.Optimal design of Moddock barrier mixing element on extruder screw[J].China Rubber Industry,2006,53(11):684-687. |
| |
| Authors: | LIANG Ji-zhao |
| |
| Affiliation: | South China University of Teehnology,Guangzhou 510640,China |
| |
| Abstract: | The optimal design of Moddock barrier mixing element on extruder screw was investigated. Based on the basic equation of viscous fluid flow,a simplified mathematical model of the optimal / design of Moddock barrier mixing element on extruder screw was established aiming at consuming the minimal energy per unit output. This model was solved by means of complex method. Finally,the suggested shear length, shear clearance, barrier length andnumber of barrier channel were determined. The optimized results in this study were in accordance with the optimal values recommended in the published reports. |
| |
| Keywords: | extruder screw Moddock barrier mixing element optimal design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《橡胶工业》浏览原始摘要信息 |
|
点击此处可从《橡胶工业》下载全文 |
