| 圆盖塑料件注塑模的改进 |
| |
| 引用本文： | 李刚.圆盖塑料件注塑模的改进[J].工程塑料应用,2005,33(9):55-56. |
| |
| 作者姓名： | 李刚 |
| |
| 作者单位： | 济南瑞福德塑胶模具有限公司,济南,250100 |
| |
| 摘 要： | 介绍圆盖塑料件注塑模的改进过程,通过对模具结构进行分析,将型腔布置改为H型排列,把半径方向的侧浇口改为切线方向的侧浇口及潜伏式浇口,取得良好效果,保证了产品质量,工艺参数的调整范围也相应增宽,且趋于稳定．
|
| 关 键 词： | 注塑模 模具结构 产品质量 |
| 收稿时间： | 2005-06-29 |
| 修稿时间： | 2005年6月29日 |
AMELIORATION OF INJECTION MOULD OF LID PARTS |
| |
| Li Gang.AMELIORATION OF INJECTION MOULD OF LID PARTS[J].Engineering Plastics Application,2005,33(9):55-56. |
| |
| Authors: | Li Gang |
| |
| Abstract: | Amelioration process of injection mould of lid parts are introduced.By analyzing the mould structure,the die cavity placement is changed to "H"-type,the radius directional gate is changed to tangent directional gate and tunnel gate.This projects can insure the quality of the products,and widen the adjusting range of the process parameter. |
| |
| Keywords: | injection mould mould structure product quality |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
