| 中钢天津响螺湾工程后压浆钻孔灌注桩施工技术 |
| |
| 引用本文： | 张淑娟,李洪厂.中钢天津响螺湾工程后压浆钻孔灌注桩施工技术[J].探矿工程,2014,41(3):68-72,79. |
| |
| 作者姓名： | 张淑娟 李洪厂 |
| |
| 作者单位： | [1]北京工业大学建筑勘察设计院,北京100022 [2]北京鼎实环境工程有限公司,北京100029 |
| |
| 摘 要： | 中钢天津响螺湾工程基础桩采用后压浆钻孔灌注桩，最大桩长达76 m，设计单桩承载力特征值达15000 kN。阐述该工程钻孔桩的施工工艺、施工中出现的问题和解决方法、孔口钢筋笼直螺纹对接技术、后压浆施工工艺。通过现场试验，全部桩为Ⅰ类桩，单桩承载力达到设计要求，极限承载力实测值最大为35000 kN，为工程桩的设计提供了可靠的技术参数。
|
| 关 键 词： | 钻孔灌注桩 后压浆 垂直度 孔口直螺纹连接 单桩承载力 极限承载力 |
| 收稿时间： | 2013/11/13 0:00:00 |
| 修稿时间： | 2013/11/13 0:00:00 |
Construction Technology of Post-grouting Bored Pile for Xiangluowan Project of Sinosteel in Tianjin |
| |
| ZHANG Shu-juan and LI Hong-chang.Construction Technology of Post-grouting Bored Pile for Xiangluowan Project of Sinosteel in Tianjin[J].Exploration Engineering(Drilling & Tunneling),2014,41(3):68-72,79. |
| |
| Authors: | ZHANG Shu-juan and LI Hong-chang |
| |
| Affiliation: | 1. Institute of Architectural Exploratory and Design, Beijing University of Technology, Beijing 100022, China; 2. Beijing Dingshi Environmental Engineering Co. , Ltd. , Beijing 100029, China) |
| |
| Abstract: | The post-grouting bored pile was used for the foundation pile for Xiangluowan project of Sinosteel in Tianjin, the maximum length of the pile was 76m and the designed eigenvalue of bearing capacity of single pile was up to 15000kN.The paper elaborates the bored pile about its construction technology, technical difficulties and the solutions, straight thread connection technology for reinforcement cage at pile hole entrance and post grouting construction technology.The field tests prove that all the piles are of the classⅠ, the bearing capacity of single pile meets the design requirements and the maxi-mum value of ultimate bearing capacity is 35000kN. |
| |
| Keywords: | bored grouting pile post grouting verticality straight thread connection at pile hole entrance bearing capac-ity of single pile ultimate bearing capacity |
| 本文献已被 维普 等数据库收录！ |
| 点击此处可从《探矿工程》浏览原始摘要信息 |
|
点击此处可从《探矿工程》下载全文 |
