| 开式冷挤压工艺参数的上限法分析与实验研究 |
| |
| 引用本文： | 陈胤,林涵,黎文锋,林永南.开式冷挤压工艺参数的上限法分析与实验研究[J].福建建筑高等专科学校学报,2009(3):253-255. |
| |
| 作者姓名： | 陈胤 林涵 黎文锋 林永南 |
| |
| 作者单位： | 福建工程学院材料科学与工程系,福建福州350108 |
| |
| 摘 要： | 采用球形速度场建立实心棒开式冷挤压的数学模型，应用上限法推算出极限允许变形程度与可行入模角2个基本工艺参数，设计了工艺方案及模具。采用磷皂化与涂敷水荆石墨2种工艺润滑方式，对理论推算结果进行了实验验证与修正，最后给出了保证工艺稳定、可靠定量数据。
|
| 关 键 词： | 开式冷挤压 球形速度场 上限法 实验 |
Analysis of process parameter of open-die cold extrusion with upper-bound method |
| |
| Chen Yin,Lin Han,Li Wenfeng,Lin Yongnan.Analysis of process parameter of open-die cold extrusion with upper-bound method[J].Journal of Fujian College of Architecture & C.E.,2009(3):253-255. |
| |
| Authors: | Chen Yin Lin Han Li Wenfeng Lin Yongnan |
| |
| Affiliation: | (Material Science and Engineering Department, Fujian University of Technology, Fuzhou 350108, China) |
| |
| Abstract: | A mathematic model of cold extrusion for solid bar open-die was established in terms of the spherical velocity field. Two basic theoretical parameters of allowable maximum deformation and die cone angle were derived by means of upper-bound method. The experimental scheme and the associated die for open-die cold extrusion were designed. The two theoretical parameters were verified and corrected via the lubrication patterns of phosphate and soaping treatment and smearing aquadag. Applicable quantitative data for reliable process were provided. |
| |
| Keywords: | open-die cold extrusion spherical velocity field upper-bound method experiment |
| 本文献已被 维普 等数据库收录！ |
