首页 | 官方网站   微博 | 高级检索  
     

AZ91D化学镀Ni-P结合强度研究
引用本文:徐加有,张继红,程艳艳. AZ91D化学镀Ni-P结合强度研究[J]. 汽车工艺与材料, 2006, 0(10): 11-13,26
作者姓名:徐加有  张继红  程艳艳
作者单位:长春工业大学,吉林,长春,130012;长春工业大学,吉林,长春,130012;长春工业大学,吉林,长春,130012
摘    要:利用金相显微镜、SEM、能谱仪(EDS),研究了镁合金AZ91D的化学镀Ni-P的结合强度。结果表明,镁合金基体的镀前处理对镀层的结合强度至关重要。没有经过前处理的镁合金的镀层结合力差,而经过严格前处理的镀层结合力良好。前处理中酸洗、活化以及在对镁合金基体打磨过程中残留的杂质对镀层结合强度的影响较大,特别是Fe、C等杂质元素的掺入使得镀层的结合强度大大降低;pH值也对镀层的结合强度有很大影响,随着pH值的升高,镀层的结合强度降低。

关 键 词:镁合金  化学镀  结合强度
文章编号:1003-8817(2006)10-0011-03
收稿时间:2006-05-25
修稿时间:2006-05-25

Investigation of Bond Strength of Electroless Plating Ni-P on Mg Alloy AZ91D
XU Jia-you,ZHANG Ji-hong,CHENG Yan-yan. Investigation of Bond Strength of Electroless Plating Ni-P on Mg Alloy AZ91D[J]. Automobile Technology & Material, 2006, 0(10): 11-13,26
Authors:XU Jia-you  ZHANG Ji-hong  CHENG Yan-yan
Affiliation:Changchun University of Technology, Changchun Jilin 130012, China
Abstract:The bond strength of Ni-P coating on Mg alloy AZ91D is studied with metalloscope,SEM,EDS.Results show the pretreatment of basal body of magnesium alloy is important to the bond strength.Bad bond strength was found on the Mg alloy with no pretreatment,while good bond strength was obtained on the coating with strict pretreatment.Acidwashing,activating and impurity in the course of dressing in pretreatment had a great influence on the bond strength,especially impurity element,i.e.Fe,C,etc.,made the bond strength of the coating lower remarkably.The pH value also affected greatly bond strength of coating.With the increase of pH value,the bond strength of coating was reduced.
Keywords:Mg alloy  electroless plating  bond strength
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号