Removal of color from fruit candy waste by activated carbon adsorption |
| |
Authors: | H. Duygu Ozsoy J. van Leeuwen |
| |
Affiliation: | a Dept. of Environmental Engineering, Engineering Faculty, Mersin University, 33360, Turkey b Dept. of Civil, Construction and Environmental Engineering, Iowa State University, Ames, IA 50011, USA c Dept of Agricultural and Biosystem Engineering, Iowa State University, Ames, IA 50011, USA d Dept. of Food Science and Human Nutrition, Iowa State University, Ames, IA 50011, USA |
| |
Abstract: | The research in this paper was aimed at finding a treatment method for recovery of fruit candy (fruit leathers) wastes. Fruit leather wastes were dissolved in water to investigate the efficacy of activated carbon adsorption to remove food colorants, which reduce recycling possibilities. The effects of initial pH (2.5-9), food colorant concentration (10-110 g fruit leather/L) and adsorbent dosage (1-12 g/L) on the adsorption process were investigated. Maximum adsorption was obtained at the original pH value of dissolved fruit candy waste in water. Maximum adsorbent capacities for red, yellow and blue food colorants were 4.4; 11.7 and 2 mg/g at pH 3.5 respectively. Regeneration of food colorant loaded activated carbon can be effected at 400 °C. Cost estimates indicate that red color removal would seem to be an economical proposition, costing about $19/ton fruit candy waste, yellow marginal at $70/ton waste, and blue uneconomical at $245/ton waste. |
| |
Keywords: | Adsorption Food industry Fruit candy Recycle Solid waste |
本文献已被 ScienceDirect 等数据库收录! |
|