Specific heat of amorphous3He films and confined liquid3He

We have measured the heat capacities of³He films and liquid³He in porous Vycor glass at 10 to 600 mK. With increasing the film thickness from 1 to 3 atomic layers, the specific heat evolves gradually from that typical to solid to that of liquid³He. At about 2 atomic layers, however, its low-temperature part is nearly temperature-independent; we interpret this as a result of gradual freezing of spins in an amorphous solid³He film with decreasing the temperature. The contribution of liquid³He in the center of the Vycor pores can be described as the specific heat of bulk liquid³He at corresponding pressures in the range 0 to 28 bar. The thickness of amorphous solid on the pore walls increases with external pressure roughly linearly. Preplating the walls with⁴He allows to determine the positions of³He atoms contributing to the surface specific heat at 10 to 50 mK. In addition, the contribution from the specific heat of³ He -⁴He mixing at 100 to 600 mK is discussed as a function of pressure and amount of⁴He.0n leave from ISSP Acad. Sci. of Russia, Chernogolovka, Russia