首页 | 官方网站   微博 | 高级检索  
     

矿用高强度链环钢23MnNiMoCr54奥氏体晶粒长大行为的研究
引用本文:赵海东,刘佳兴,张朝磊,苗红生,刘雅政.矿用高强度链环钢23MnNiMoCr54奥氏体晶粒长大行为的研究[J].特殊钢,2021,42(2):10-13.
作者姓名:赵海东  刘佳兴  张朝磊  苗红生  刘雅政
作者单位:1西宁特殊钢股份有限公司,西宁810005 ; 2北京科技大学材料科学与工程学院,北京100083
摘    要:研究结果表明:链环钢23MnNiMoCr54奥氏体晶粒的粗化温度为900 ℃,为避免“混晶现象”的发生, 最佳奥氏体化工艺在850℃下保温30 min。在相同保温时间下,奥氏体晶粒随着加热温度在850-1100℃内升高 呈指数关系长大。在相同加热温度下,平均奥氏体晶粒尺寸与保温时间的关系符合Beck模型,晶粒长大指数n随 着加热温度的升高先降低后升高。依据Arrhenius公式拟合得到了链环钢23MnNiMoCr54在950 - 1250℃内的奥氏体晶粒长大模型 D=2. 105 xl03 t0.138exp( -5.18 x 104/RT)。

收稿时间:2020-08-30

A Study on Austenite Grain Growth Behaviour of High Strength 23MnNiMoCr54 Link-Chain Steel for Mining
Zhao Haidong,Liu Jia xing,Zhang Chao lei,Miao Hongsheng,Liu Yazheng.A Study on Austenite Grain Growth Behaviour of High Strength 23MnNiMoCr54 Link-Chain Steel for Mining[J].Special Steel,2021,42(2):10-13.
Authors:Zhao Haidong  Liu Jia xing  Zhang Chao lei  Miao Hongsheng  Liu Yazheng
Affiliation:1 Xining Special Steel Co Ltd, Xining 8100052 School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083
Abstract:The research results show that the coarsening temperature of austenite grains of 23MnNiMoCr54 link-chain steel is 900℃  ,in order to avoid “mix grain phenomena" occured, the opitmum austenitizing temperature of steel is 850 ℃ for 30 min. Austenite grains grow exponentially with the increase of heating temperature from 850 ℃ to 1100℃ for same holding time. The relationship between the average austenite grain size and holding time conforms to Beck model at the same heating temperature,the grain growth index (n) first decreases and then increases with increase of temperature. The austenitic grain growth model  D=2.105 xl03 t0.138exp( -5.18 x 104/RT)。 for 23MnNiMoCr54 link-chain steel at 950 ~ 1250 °C is obtained by fitting in Arrhenius formula.
Keywords:
本文献已被 CNKI 等数据库收录!
点击此处可从《特殊钢》浏览原始摘要信息
点击此处可从《特殊钢》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号