首页 | 官方网站   微博 | 高级检索  
     

颗粒增强Fe3Al基复合材料的制备和性能
引用本文:薛烽,孙扬善,包益红,梅建平. 颗粒增强Fe3Al基复合材料的制备和性能[J]. 材料研究学报, 2000, 14(4): 344-348
作者姓名:薛烽  孙扬善  包益红  梅建平
作者单位:东南大学
摘    要:用熔铸法制备了SiC,Al2O3和TiB2颗粒增强Fe-28Al-5Cr基复合材料,研究了材料的微观组织和力学性能,结果表明,Aa2O3在Fe3Al中的化学稳定性很好,TiB2与基体发生了部分反应,SiC与基体的反应严重,复合材料在室温和高温下的力学性能的变化说明,上述颗粒的加入使材料的强度较大幅度的提高,塑性有所下降。

关 键 词:复合材料 Fe3Al基 制备 力学性能 显微组织
文章编号:1005-3093(2000)04-0344-05
修稿时间:1999-09-15

MELT PROCESSED Fe3Al MATRIX COMPOSITES REINFORCED WITH CERAMIC PARTICLES
XUE Feng,SUN Yangshan,BAO Yihong,MEI Jianping. MELT PROCESSED Fe3Al MATRIX COMPOSITES REINFORCED WITH CERAMIC PARTICLES[J]. Chinese Journal of Materials Research, 2000, 14(4): 344-348
Authors:XUE Feng  SUN Yangshan  BAO Yihong  MEI Jianping
Abstract:SiC, Al2O3 and TiB2 particles reinforced Fe-28Al-5Cr matrix (in atomic fraction) composites have been investigated. The composites were prepared by adding 5% (volume fraction)ceramic particles in molten Fe3Al. The thermodynamical stability of these particles in Fe3Al is different. The stability of Al2O3 is very good, and TiB2 reacted partly, SiC reacted seriously with matrix.Mechanical testing at room and high temperature showed that significant improvements in strength was obtained, the decrease of elongation was not seriously.
Keywords:intermetallics   composites   Fe3Al  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号