| 炭/炭复合材料机轮刹车盘磨削加工方案分析 |
| |
| 引用本文： | 杨文堂,杨明勇,王林丰.炭/炭复合材料机轮刹车盘磨削加工方案分析[J].金属材料与冶金工程,2006,34(2):3-6,10. |
| |
| 作者姓名： | 杨文堂 杨明勇 王林丰 |
| |
| 作者单位： | 中南大学粉末冶金国家重点实验室,湖南,长沙,410083 |
| |
| 摘 要： | 以炭／炭复合材料飞机机轮刹车盘为例，介绍了冼俄复合材料坯体的组成及机械特性、表面质量要求。根据该材料的特性和产品要求。制定了产品最终机加工磨削加工方案。同时，采用周边固定法。对工件的受力情况作了分析，对用此种固定法磨削加工的产品质量作了评价，结果表明，此种磨削工艺完全满足生产的要求。
|
| 关 键 词： | 炭/炭复合材料 机轮刹车盘 磨削方法 表面质量 |
| 文章编号： | 1005-6084（2006）02-03-04 |
| 收稿时间： | 2005-12-21 |
| 修稿时间： | 2005-12-21 |
ANALYSIS OF GRINDING PROCESSING METHOD OF AIRPLANE WHEEL BRAKE DISK THAT MADE WITH CARBON -CARBON COMPOSITES |
| |
| YANG Wen-tang,YANG Ming-yong,WANG Lin-feng.ANALYSIS OF GRINDING PROCESSING METHOD OF AIRPLANE WHEEL BRAKE DISK THAT MADE WITH CARBON -CARBON COMPOSITES[J].Metal Materials And Metallurgy Engineering,2006,34(2):3-6,10. |
| |
| Authors: | YANG Wen-tang YANG Ming-yong WANG Lin-feng |
| |
| Affiliation: | State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083, China |
| |
| Abstract: | Taking airplane wheel brake disk that made with C/C composites as an example,the body component of C/C composites,mechanical properties as well as surface quality requirements were mainly introduced.According to properties of the material and requirements of the product,the grinding technique of final machining of product was established.At the same time,by adopting the periphery fastness method,the force loading of workpiece was analyzed and relative product quality was also evaluated.The results showed that,this grinding technique could entirely meet the requirements of machining of C/C composites. |
| |
| Keywords: | carbon/carbon composites airplane wheel brake disk grinding method surface quality |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
