| 双列调心凹面滚子轴承接触载荷分析 |
| |
| 引用本文： | 杨虎,江岩,张文虎,谢鹏飞,李峰.双列调心凹面滚子轴承接触载荷分析[J].轴承,2021(4):6-11. |
| |
| 作者姓名： | 杨虎 江岩 张文虎 谢鹏飞 李峰 |
| |
| 作者单位： | 洛阳轴承研究所有限公司;河南省高性能轴承技术重点实验室;高性能轴承数字化设计国家国际科技合作基地;北京航天动力研究所;河南科技大学机电工程学院;常州光洋轴承股份有限公司博士后工作站 |
| |
| 基金项目： | 国家自然科学基金青年科学基金项目(51905152);高端轴承摩擦学技术与应用国家地方联合工程实验室开放基金(201708)。 |
| |
| 摘 要： | 在考虑滚子与套圈、滚子与保持架以及保持架与引导套圈作用力的条件下,建立双列调心凹面滚子轴承动力学模型。以某双列调心凹面滚子轴承为研究对象,与静力学分析模型滚子最大接触载荷计算结果对比,验证了模型的正确性。并分析了工况条件(轴向载荷、径向载荷、倾覆力矩、转速)和结构参数(滚子数量、滚子长度、径向游隙)对滚子最大接触载荷的影响,结果表明:随轴向载荷增大,一列滚子受力增大,另一列滚子受力减小;随径向载荷增大,滚子最大接触载荷增大;随倾覆力矩增大,2列滚子接触载荷几乎不变;随转速增大,滚子最大接触载荷增大;随滚子数量增多和滚子长度增加,滚子最大接触载荷减小;随径向游隙增大,滚子最大接触载荷呈先减小后增大趋势。
|
| 关 键 词： | 滚动轴承 调心滚子轴承 双列轴承 凹面滚子 动力学 载荷 结构参数 工况条件 |
Analysis on Contact Load of Double Row Spherical Concave Roller Bearings |
| |
| YANG Hu,JIANG Yan,ZHANG Wenhu,XIE Pengfei,LI Feng.Analysis on Contact Load of Double Row Spherical Concave Roller Bearings[J].Bearing,2021(4):6-11. |
| |
| Authors: | YANG Hu JIANG Yan ZHANG Wenhu XIE Pengfei LI Feng |
| |
| Affiliation: | (Luoyang Bearing Research Institute Co.,Ltd.,Luoyang 471039,China;Henan Key Laboratory of High Performance Bearing Technology,Luoyang 471039,China;China International Science and Technology Cooperation Base for Digitization Design of High Performance Bearings,Luoyang 471039,China;Beijing Aerospace Propulsion Institute,Beijing 100176,China;School of Mechatronics Engineering,Henan University of Science and Technology,Luoyang 471003,China;Postdoctoral Workstation,Changzhou Guangyang Bearing Co.,Ltd.,Changzhou 213001,China) |
| |
| Abstract: | Considering the forces of roller and ring,roller and cage,cage and guide ring,the dynamic model of double row spherical concave roller bearings is established.Taking a double row spherical concave roller bearing as the research object,and comparing calculation results of maximum contact load of rollers with static analysis model,the correctness of the model is verified.The influence of operating conditions(axial load,radial load,overturning moment,rotational speed)and structural parameters(number of rollers,length of rollers,radial clearance)on maximum contact load of rollers is analyzed.The results show that:with the increase of axial load,the force of one row of roller increases,and the force of the other row of roller decreases;with the increase of radial load,the maximum contact load of rollers increases;with the increase of overturning moment,the contact load of two row of rollers is almost unchanged;with the increase of rotational speed,the maximum contact load of rollers increases;with the increase of number and length of rollers,the maximum contact load of rollers decreases;with the increase of radial clearance,the maximum contact load of rollers decreases first and then increases. |
| |
| Keywords: | rolling bearing spherical roller bearing double row bearing concave roller dynamics load structural parameter operating condition |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
