| 少齿数圆柱斜齿轮加工新技术及理论计算 |
| |
| 引用本文： | 吴俊亮,安平,孙文浩. 少齿数圆柱斜齿轮加工新技术及理论计算[J]. 山东大学学报(工学版), 2006, 36(4): 48-51 |
| |
| 作者姓名： | 吴俊亮 安平 孙文浩 |
| |
| 作者单位： | 山东大学,土建与水利学院,山东,济南,250061;山东大学,机械工程学院,山东,济南,250061 |
| |
| 摘 要： | 通过实例介绍了用花键铣床加工少齿数（2～5个齿）、小直径圆柱斜齿轮的新方法，此方法较传统滚齿机加工可提高效率10倍以上.文章给出了用花键铣床加工圆柱斜齿轮的无差动分齿挂轮公式，并用微分法推导了分齿挂轮比的计算允许误差要求的计算公式.指出用高速珩磨技术可以提高齿轮精度答7级以上，粗糙度达Ra0.4，降低啮合噪声到70?dB以下.
|
| 关 键 词： | 少齿数小直径圆柱斜齿轮 花键铣床 无差动分齿 |
| 文章编号： | 1672-3961(2006)04-0048-04 |
| 收稿时间： | 2005-08-20 |
| 修稿时间： | 2005-08-20 |
A new technology of machining cylindrical helical gear |
| |
| WU Jun-liang,AN Ping,SUN Wen-hao. A new technology of machining cylindrical helical gear[J]. Journal of Shandong University of Technology, 2006, 36(4): 48-51 |
| |
| Authors: | WU Jun-liang AN Ping SUN Wen-hao |
| |
| Affiliation: | 1. School of Civil Engineering Shandong University,Jinan 250061，China;2. School of Mechanical Engineering,Shandong University,Jinan 250061,China |
| |
| Abstract: | A new method to machine cylindrical helical gear with minority number of teeth (2～5) and small diameter on spline miller is described in this paper. The effectiveness of this new method can be improved by 10 times compare to that of traditional machining on gear hobbing machine. The expressions of undifferentical side set change speed gear about machining cylindrical helical gear with spline miller are given as well as the expressions of side set change speed gear ratio. As a result, the gear precision can be improved by the technology of high speed honing and the degree of roughness is Ra0.4, which attributes to preventing the undesired sound of gearing mesh from being higher than 70 dB. |
| |
| Keywords: | cylindrical helical gear with minority number of teeth and small diameter spline millerr undifferentical side set |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《山东大学学报(工学版)》浏览原始摘要信息 |
|
点击此处可从《山东大学学报(工学版)》下载全文 |
