| 成型压力对SiC陶瓷制品密度的影响 |
| |
| 引用本文： | 陆有军. 成型压力对SiC陶瓷制品密度的影响[J]. 中国材料科技与设备, 2009, 6(3): 26-27 |
| |
| 作者姓名： | 陆有军 |
| |
| 作者单位： | 北方民族大学材料学院,宁夏银川750021 |
| |
| 基金项目： | 宁夏自然科学基金资助项目（NZ0687） |
| |
| 摘 要： | 本文研究了不同压力下干压成型的陶瓷制品，在2150℃的高温下进行固相无压烧结，制备性能较好的陶瓷制品。通过对烧结体密度的研究，得出最佳的成型压力条件为100MPa，烧结密度为3．111g／cm^3，相对密度为97％。
|
| 关 键 词： | 干压成型 密度 固相烧结 |
Effect of Density of Silicon Carbide Ceramic Products on the Molding Pressure |
| |
| LU You-jun. Effect of Density of Silicon Carbide Ceramic Products on the Molding Pressure[J]. Chinese Materials Science Technology & Equipment, 2009, 6(3): 26-27 |
| |
| Authors: | LU You-jun |
| |
| Affiliation: | LU You-jun (School of Material Science and Engineering,North University for Nationalities, Ningxia,Yinchuan, 750021,China) |
| |
| Abstract: | The paper studied the ceramic products under the different pressure with dry forming, the better performance ceramic products was preparated under 2150 degrees solid-phase pressureless sintering. Through the study of sintered density, It shows that the best conditions for the molding pressure was 100MPa, sintered density was 3. 111 g/cm^3 and relative density was 97% |
| |
| Keywords: | Dry pressure molding Density Solid state sintering |
| 本文献已被 维普 等数据库收录！ |
|
