| 06Cr17Ni5N奥氏体不锈钢热轧板表面脱皮原因 |
| |
| 引用本文： | 卢大平,祁文军,刘炳,马正伟,李华.06Cr17Ni5N奥氏体不锈钢热轧板表面脱皮原因[J].机械工程材料,2011(2). |
| |
| 作者姓名： | 卢大平 祁文军 刘炳 马正伟 李华 |
| |
| 作者单位： | 新疆大学机械工程学院; |
| |
| 基金项目： | 新疆维吾尔自治区高校科研计划科学研究重点项目(XJEDU2006I11) |
| |
| 摘 要： | 通过宏观形貌观察、金相分析、扫描电镜分析等对06Cr17Ni5N奥氏体不锈钢热轧板在轧制过程中产生表面脱皮的原因进行了分析。结果表明:连铸板坯表面处理不彻底,存在氧化皮或表面不平,在轧制时局部达不到其深宽比要求是导致脱皮的主要原因。
|
| 关 键 词： | 奥氏体不锈钢 脱皮 连铸坯 |
Surface Peeling Reason of Hot-Rolled 06Cr17Ni5N Austenitic Stainless Steel Plate |
| |
| LU Da-ping,QI Wen-jun,LIU Bing,MA Zheng-wei,LI Hua.Surface Peeling Reason of Hot-Rolled 06Cr17Ni5N Austenitic Stainless Steel Plate[J].Materials For Mechanical Engineering,2011(2). |
| |
| Authors: | LU Da-ping QI Wen-jun LIU Bing MA Zheng-wei LI Hua |
| |
| Affiliation: | LU Da-ping,QI Wen-jun,LIU Bing,MA Zheng-wei,LI Hua(College of Mechanical Engineering,Xinjiang University,Urumchi 830008,China) |
| |
| Abstract: | The surface peeling reason of the hot-rolled 06Cr17Ni5N austenitic stainless steel plate during rolling process was analyzed through macro-morphology observation,metallographic analysis and scanning electronic microscopy.The results show that the surface treatment of continuous casting slab was not complete,which led to the oxide scale and rough surface.And the main reason for the peeling was that the local plate could not meet depth-to-width ratio requirements during rolling. |
| |
| Keywords: | austenitic stainless steel peeling continuous casting slab |
| 本文献已被 CNKI 等数据库收录！ |
|
