Effects of non-singular stresses on crack-tip fields for pressure-sensitive materials,Part 1: Plane strain case

Mode I near-tip stress fields for elastic perfectly plastic pressure-sensitive materials under plane strain and small-scale yielding conditions are presented. A Coulomb-type yield criterion described by a linear combination of the effective stress and the hydrostatic stress is adopted in the analysis. The finite element computational results sampled at the distance of a few crack opening displacements from the tip show that, as the pressure sensitivity increases, the magnitudes of the normalized radial and hoop stress ahead of the tip decrease, the total angular span of the singular plastic sectors decreases, and the angular span of the elastic sectors bordering the crack surfaces increases. When non-singular T stresses are considered along the boundary layer of the small-scale yielding model, the near-tip stresses decrease as the T stress decreases. The plastic zone shifts toward the crack surfaces as the T stress increases. When the discontinuities of the radial stress and the out-of-plane normal stress along the border between the plastic sector and the elastic sector are allowed, the angular variations of the asymptotic crack-tip fields agree well with those of the finite element computations. Variation of the Q stresses for pressure-sensitive materials can be found from the asymptotic solutions when the plastic zone size ahead of the tip is relatively larger than the crack opening displacement. In addition the T stress is shown to have strong effects on the plastic zone sizes and shapes which could affect the toughening of pressure-sensitive materials.