| 铝合金电磁铸造工艺参数的研究 |
| |
| 引用本文： | 金俊泽,张兴国,曹志强,朱晓鹰. 铝合金电磁铸造工艺参数的研究[J]. 材料研究学报, 1996, 10(4): 397-400 |
| |
| 作者姓名： | 金俊泽 张兴国 曹志强 朱晓鹰 |
| |
| 作者单位： | 大连理工大学，大连理工大学铸造工程研究中心 |
| |
| 基金项目： | 中国有色金属工业总公司和辽宁省科委项目 |
| |
| 摘 要： | 通过近似计算和试验确定了工程规模的铝合金电磁铸造（ＥＭＣ）基本工艺参数如感应器电流、电压、频率、功能消耗等一液柱高度及稳定性的关系，设计制造了ＥＭＣ装置，成功地铸造了截面直径为０．１８ｍ，０．１１×０．０５ｍ，０．５２×０．１３ｍ的铝及铝合金锭和扁锭。
|
| 关 键 词： | 电磁铸造 感应器 屏蔽罩 液柱高度 铝合金 |
| 收稿时间： | 1996-08-25 |
| 修稿时间： | 1996-08-25 |
STUDY ON TECHNOLOGICAL PARAMETERS OF EMC PROCESSING IN Al ALLOYS |
| |
| JIN Junze,ZHANG Xingguo,CAO Zhiqiang,ZHU Xiaoying. STUDY ON TECHNOLOGICAL PARAMETERS OF EMC PROCESSING IN Al ALLOYS[J]. Chinese Journal of Materials Research, 1996, 10(4): 397-400 |
| |
| Authors: | JIN Junze ZHANG Xingguo CAO Zhiqiang ZHU Xiaoying |
| |
| Affiliation: | JIN Junze,ZHANG Xingguo,CAO Zhiqiang,ZHU Xiaoying (Dalian University of Technology)(Correspondent:Director Professor,The Engineering Research Center of Foundry,Dalian University of Tech nology,Dalian ) |
| |
| Abstract: | By an approximate calculation method, the electric current, voltage,impedance as well as power during EMC process were estimated. As a result, a generator type was chosen. The device of EMC,such as inductor, was designed and set up. The aluminum and alumi |
| |
| Keywords: | electromagnetic casting inductor screen height of molten column |
| 本文献已被 CNKI 维普 等数据库收录！ |
| 点击此处可从《材料研究学报》浏览原始摘要信息 |
|
点击此处可从《材料研究学报》下载全文 |
|
