| 不同表面预处理对有机电致发光显示器性能的影响 |
| |
| 引用本文： | 庄筱磊,徐洪光,张积梅,何钧,施展,周刚,余峰,黄浩.不同表面预处理对有机电致发光显示器性能的影响[J].液晶与显示,2006,21(5):506-509. |
| |
| 作者姓名： | 庄筱磊 徐洪光 张积梅 何钧 施展 周刚 余峰 黄浩 |
| |
| 作者单位： | 上海广电电子股份有限公司,平板显示研发中心,上海,200081 |
| |
| 基金项目： | 上海市青年科技启明星计划(B类)(No.06QB14051) |
| |
| 摘 要： | 从生产角度研究了基板表面的预处理工艺对OLED性能的影响,分别用UVOzone、氧Plasma以及两者相结合的方式对基板进行表面处理,并按照生产工艺制作器件,从接触角、方阻以及光电特性等测试结果对各种表面处理的样品进行比较。结果表明以上处理都改善了器件性能,不同程度提高了器件的清洁度、亮度和发光效率,其中UVOzone和氧Plasma结合的方式处理效果最为显著,器件在10V时亮度达到79920cd/m2,比其他两种处理方式亮度提高约25%。
|
| 关 键 词： | 有机电致发光显示器 表面预处理 接触角 发光效率 |
| 文章编号： | 1007-2780(2006)05-0506-04 |
| 修稿时间： | 2006年7月2日 |
Effect of Different Surface Pre-treatment on OLED |
| |
| ZHUANG Xiao-lei,XU Hong-guang,ZHANG Ji-mei,HE Jun,SHI Zhan,ZHOU Gang,YU Feng,HUANG Hao.Effect of Different Surface Pre-treatment on OLED[J].Chinese Journal of Liquid Crystals and Displays,2006,21(5):506-509. |
| |
| Authors: | ZHUANG Xiao-lei XU Hong-guang ZHANG Ji-mei HE Jun SHI Zhan ZHOU Gang YU Feng HUANG Hao |
| |
| Abstract: | According to mass production, the effect of different surface pre-treatment on OLED was studied. The devices were fabricated by using the different pre-treatments: UV Ozone, O_2 Plasma and both of the two. The effects of different pre-treatments were compared by the sheet resistance, contact angle, the electrical, optical and the efficiency characteristics. The results show the performances of the devices, the cleanness, brightness and the luminance efficiency were improved by these pre-treatments, especially for both the UV Ozone and the O_2 Plasma pre-treatment. The luminance at 10 V will reach to 79 920 cd/m~2 and enhance about 25 % than the others. |
| |
| Keywords: | organic light-emitting diodes surface pre-treatment contact angle luminance efficiency |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
