| 全钢载重子午线轮胎钢丝圈受力分析 |
| |
| 引用本文： | 梁俐,刘锟,李炜,夏勇,夏源明.全钢载重子午线轮胎钢丝圈受力分析[J].轮胎工业,2004,24(10):594-597. |
| |
| 作者姓名： | 梁俐 刘锟 李炜 夏勇 夏源明 |
| |
| 作者单位： | 1. 佳通轮胎(中国)研发中心,安徽,合肥,231202
2. 中国科学技术大学,力学和机械工程系,安徽,合肥,230027 |
| |
| 摘 要： | 以10．00R20全钢载重子午线轮胎为例进行钢丝圈钢丝受力分析。利用有限元模型计算得到各种充气压力下钢丝圈钢丝的应力分布特征，并进一步得到钢丝圈钢丝的最大应力和平均应力，它们基本上与充气压力成正比；以最大应力和平均应力分别计算得到的钢丝圈安全系数相差2．3倍。有限元计算结果还表明，超载情况下钢丝圈的安全性能明显下降。
|
| 关 键 词： | 全钢载重子午线轮胎 胎圈钢丝 应力分布 安全系数 |
| 文章编号： | 1006-8171(2004)10-0594-04 |
| 修稿时间： | 2004年4月19日 |
Analysis for stress-strain in bead wire of BTR tire |
| |
| LIANG Li,LIU Kun,LI Wei,XIA Yong and XIA Yuanming.Analysis for stress-strain in bead wire of BTR tire[J].Tire Industry,2004,24(10):594-597. |
| |
| Authors: | LIANG Li LIU Kun LI Wei XIA Yong and XIA Yuanming |
| |
| Affiliation: | LIANG Li~1,LIU Kun~1,LI Wei~2,XIA Yong~2,XIA Yuan-ming~2 [1.Chinese Development Centre of Grandtour Tire,Hefei 231202,China,2.China University of Science and Technology,Hefei 230027,China] |
| |
| Abstract: | The stress-strain in the bead wire was analyzed taking 10.00R20 BTR tire as example.A FE model was used to obtain the stress distribution in bead wire of BTR tire under different inflation pressures as well as the maxium stress and the average stress in bead wire. It was found that both the maximum stress and average stress in bead wire were basically proportional to the inflation pressure;the safty factor calculated from the maximum stress was greater than that from the average stress by a factor of 2.3;and the safty of bead wire decreased significantly under overload of tire. |
| |
| Keywords: | BTR tire bead wire stress distribution safety factor |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《轮胎工业》浏览原始摘要信息 |
|
点击此处可从《轮胎工业》下载全文 |
|
