| Managed DirectX三维建模技术中的类实现 |
| |
| 引用本文： | 邢静宜 王鹏飞 谭小峰 顾瑞春. Managed DirectX三维建模技术中的类实现[J]. 微机发展, 2007, 17(4): 208-210 |
| |
| 作者姓名： | 邢静宜 王鹏飞 谭小峰 顾瑞春 |
| |
| 作者单位： | 内蒙古科技大学机械工程学院 内蒙古包头014010(邢静宜，王鹏飞，谭小峰)，内蒙古科技大学信息工程学院 内蒙古包头014010(顾瑞春) |
| |
| 基金项目： | 国家科技攻关计划资助项目(2001BA201A46) |
| |
| 摘 要： | 三维建模技术是进行三维仿真的基础,使用高级语言和图形接口进行三维建模的开发是根本的解决方法。针对目前.NET技术的快速发展与应用,采用.NET语言和Managed DirectX技术进行开发,对基于Managed DirectX的三维建模技术中的三维模型类进行了研究及实现,并在.NET环境下开发了三维模型基类库,其中使用了参数化建模方法。最终实现了基本的三维建模类,在此基础上可进一步开发出通用的三维建模器。Managed DirectX作为DirectX中重要的成员,为基于.NET框架开发三维图形应用程序提供了极大的方便。
|
| 关 键 词： | Managed DirectX .NET 三维建模 类实现 |
| 文章编号： | 1673-629X(2007)04-0208-03 |
| 修稿时间： | 2006-07-14 |
Implementation of Class in 3D Modeling Technology Based on Managed DirectX |
| |
| XING Jing-yi,WANG Peng-fei,TAN Xiao-feng,GU Rui-chun. Implementation of Class in 3D Modeling Technology Based on Managed DirectX[J]. Microcomputer Development, 2007, 17(4): 208-210 |
| |
| Authors: | XING Jing-yi WANG Peng-fei TAN Xiao-feng GU Rui-chun |
| |
| Affiliation: | XING Jing-yi1,WANG Peng-fei1,TAN Xiao-feng1,GU Rui-chun2 |
| |
| Abstract: | 3D modeling is the base of 3D simulation.The solution is development using advanced language and graphical interface.Aiming at the extend of.NET application,the 3D modeling class of 3D modeling technology is researched.The technology is based on Managed DirectX with the RAD ability of.NET framework.Class's implementation of 3D modeling is completed.The base class library of 3D modeling is built in.NET framework.Through the course of the technology development researched Managed DirectX and interrelated arithmetic of 3D graphics,3D modeling system could be developed based on the technology.As the important member,Managed DirectX provides a great convenience for the development of 3D graphical application based on.NET framework. |
| |
| Keywords: | managed directX .NET 3D modeling class Implementation |
| 本文献已被 CNKI 等数据库收录！ |
