| 压水堆环形燃料结构热工水力分析方法研究 |
| |
| 引用本文： | 刁均辉,季松涛,韩智杰. 压水堆环形燃料结构热工水力分析方法研究[J]. 原子能科学技术, 2015, 49(8): 1374-1379. DOI: 10.7538/yzk.2015.49.08.1374 |
| |
| 作者姓名： | 刁均辉 季松涛 韩智杰 |
| |
| 作者单位： | 中国原子能科学研究院 反应堆工程研究设计所，北京102413 |
| |
| 摘 要： | 以秦山二期压水堆为参考堆型,对压水堆环形燃料结构进行热工水力分析方法研究。应用SAAF程序分析了从11×11到15×15等5种不同排列方式中不同尺寸的环形燃料棒的热工水力性能,综合最小偏离泡核沸腾比、压降和燃料芯块温度等参数确定了环形燃料组件最佳排列方式为13×13。本文研究结果为相关专业分析提供了初始计算模型。
|
| 关 键 词： | 压水堆 环形燃料 热工水力 最佳排列方式 |
Methodology Study of Thermal-hydraulic Analysis for PWR Annular Fuel Assembly Array |
| |
| DIAO Jun-hui,JI Song-tao,HAN Zhi-jie. Methodology Study of Thermal-hydraulic Analysis for PWR Annular Fuel Assembly Array[J]. Atomic Energy Science and Technology, 2015, 49(8): 1374-1379. DOI: 10.7538/yzk.2015.49.08.1374 |
| |
| Authors: | DIAO Jun-hui JI Song-tao HAN Zhi-jie |
| |
| Affiliation: | China Institute of Atomic Energy, P. O. Box 275-64, Beijing 102413, China |
| |
| Abstract: | A typical Qinshan Phase-Ⅱ PWR plant was selected as the base case for methodology study of thermal-hydraulic analysis for the best array of annular fuel assembly applied in the PWR core. A range of arrays from 11×11 to 15×15 for different sizes was investigated by using a sub-channel analyzer named SAAF. On the consideration of minimum departure from nucleate boiling ratios, pressure drops and fuel temperatures, the most promising option was found to be the 13×13 array of annular fuel assembly. The calculation results in this paper provide initial calculation model for correlative analysis. |
| |
| Keywords: | PWR annular fuel thermal-hydraulics the best array |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《原子能科学技术》浏览原始摘要信息 |
|
点击此处可从《原子能科学技术》下载全文 |
