高功率、低损耗光纤合束器的制备与研究

提出了一种分步式制备端泵浦型光纤合束器的新方法.采用模具、热缩管、细丝对合束光纤进行规则合束与固定,合束后的输入光纤束在拉锥前无须扭转,可形成一整根光纤的形态,从而能够与商业切割刀、熔接机等设备兼容.采取此方法得到的71型光纤合束器的耐受功率大于1 400 W,泵浦耦合损耗低于0.1 dB.测试和分析了封装后合束器的温度分布,光纤聚合物层温升较大,其限制了合束器耐受功率的提升.

Fabrication and research of high power and less-loss fiber combiner

A novel technique for end-pumped fiber combiner fabrication by multi-step process was reported. The mould, heat-shrinkable tube and filament were used to combine and fix the fibers. The combined input fiber beam can form a whole fiber without turning around before tapering, and was compatible with the commercial cut knife and welding machine. The fabricated 71-type fiber combiner had a endurable power of 1 400 W and the pump coupling loss was under 0.1 dB. The temperature distribution of the packaged fiber combiner was measured and analyzed. It shows that the polymer layer has a big temperature rise and limits the endurable power of the fiber combiner.