| 基于混合算法的薄壁件铣削加工工艺参数优化 |
| |
| 引用本文： | 曾莎莎,彭卫平,雷金.基于混合算法的薄壁件铣削加工工艺参数优化[J].中国机械工程,2017,28(7):842. |
| |
| 作者姓名： | 曾莎莎 彭卫平 雷金 |
| |
| 作者单位： | 武汉大学动力与机械学院，武汉，430072 |
| |
| 基金项目： | 国家自然科学基金资助项目(51505343);
中国博士后科学基金资助项目(2015M572192);
中央高校基本科研业务费专项资金资助项目(2042015kf0048) |
| |
| 摘 要： | 结合神经网络法和遗传算法的优点，提出了一种以倒传递神经网络法为基础的加工工艺参数优化方法，对薄壁件铣削加工工艺参数进行优化。将田口实验所得数据经倒传递神经网络进行训练与测试，来建立薄壁件铣削加工的信噪比预测器，并通过最大化信噪比，将铣削过程变异降至最低，进而找出最佳加工工艺参数组合。通过数值模拟与加工实验，验证了所提方法在薄壁件铣削加工工艺参数优化中的有效性。
|
| 关 键 词： | 薄壁件 田口法 遗传算法 工艺参数优化 |
Optimization of Milling Process Parameters Based on Hybrid Algorithm for Thin-walled Workpieces |
| |
| ZENG Shasha,PENG Weiping,LEI Jin.Optimization of Milling Process Parameters Based on Hybrid Algorithm for Thin-walled Workpieces[J].China Mechanical Engineering,2017,28(7):842. |
| |
| Authors: | ZENG Shasha PENG Weiping LEI Jin |
| |
| Affiliation: | School of Power and Mechanical Engineering,Wuhan University,Wuhan,430072 |
| |
| Abstract: | Combining with advantages of neural network method and genetic algorithm, a method to optimize machining process parameters was proposed for thin-walled workpieces based on back propagation neural network(BPNN). The data gained from Taguchi experiments were applied to train in BPNN so as to generate the S/N ratio predictor and quality predictor. By maximizing the S/N ratio, variation of milling processes was minimized, and the optimal process parameter combinations were found. Through numerical simulation and machining experiments, effectiveness of the proposed method in optimization of milling process parameters of thin-walled workpieces was validated. |
| |
| Keywords: | thin-walled workpiece taguchi method genetic algorithm processing parameter optimization |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《中国机械工程》浏览原始摘要信息 |
|
点击此处可从《中国机械工程》下载全文 |
