首页 | 官方网站   微博 | 高级检索  
     

相容剂对PC/PLA共混体系性能的影响
引用本文:单铮铮,董旭,潘肇琦,杲云.相容剂对PC/PLA共混体系性能的影响[J].塑料工业,2012,40(2):96-99.
作者姓名:单铮铮  董旭  潘肇琦  杲云
作者单位:华东理工大学材料科学与工程学院,上海,200237
摘    要:研究了不同相容剂对聚碳酸酯/聚乳酸(PC/PLA)共混体系性能的影响,找出了增容效果明显的相容剂EMG,并进一步研究了EMG对PC/PLA共混体系相容性及力学性能的影响。结果表明:相容剂EMG的加入,促使共混体系中PC的玻璃化转变温度有所下降,PLA的玻璃化转变温度进一步提高,增强了两相间的界面黏结作用,改善了PC/PLA之间的相容性;EMG的加入,提高了PC/PLA共混物的力学性能,当相容剂质量分数为9%时,拉伸强度、断裂伸长率和缺口冲击强度均达到最大值。

关 键 词:聚碳酸酯  聚乳酸  共混改性  相容性

Effect of Compatibilizer on Property of PC/PLA Blend
SHAN Zheng-zheng , DONG Xu , PAN Zhao-qi , GAO Yun.Effect of Compatibilizer on Property of PC/PLA Blend[J].China Plastics Industry,2012,40(2):96-99.
Authors:SHAN Zheng-zheng  DONG Xu  PAN Zhao-qi  GAO Yun
Affiliation:(School of Materials Sci.and Eng.,East China University of Sci.and Tech.,Shanghai 200237,China)
Abstract:The effects of different compatibilizers on properties of PC/PLA blend were studied,EMG was found out as a good compatibilizer,and further study on the compatibility and mechanical property was went on.The results showed the addition of EMG decreased the Tg of PC,increased the Tg of PLA,and increased the interfacial bonding force between the two phases,resulted in improving the compatibility of PC/PLA blend.The addition of EMG improved the mechanical property of the blend.When the content of EMG was 9 phr,the tensile strength,elongation at break and impact strength was the maximum.
Keywords:PC  PLA  Blending Modification  Compatibility
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号