首页 | 官方网站   微博 | 高级检索  
     

炉料搭配和均匀化处理对铸造锌铝合金组织与性能的影响
引用本文:王晓江,田广平,王义详,罗军,陈建军.炉料搭配和均匀化处理对铸造锌铝合金组织与性能的影响[J].铸造技术,2008,29(12).
作者姓名:王晓江  田广平  王义详  罗军  陈建军
作者单位:1. 陕西工业职业技术学院材料工程系,陕西,咸阳,712000
2. 秦川机床集团公司铸造分公司,陕西,宝鸡,721009
摘    要:采用扫描电子显微镜和能谱微区分析,研究了以全新炉料和新旧炉料两种不同炉料搭配方式生产铸造锌铝合金铸件的组织与性能,并对其在铸态和经均匀化处理后的显微组织及成分进行了对比分析。发现采用全新炉料搭配比采用新旧炉料按1∶1搭配的铸造锌铝合金显微组织均匀、力学性能好;在相同条件下,经均匀化处理比铸造状态下的综合性能好。

关 键 词:铸造锌铝合金  炉料搭配  均匀化处理  显微组织

Influence of Charge Mixture and Homogenization Treatment on the Microstructure and Properties of As-cast Zinc-aluminum Alloy
WANG Xiao-jiang,TIAN Guang-ping,WANG Yi-xiang,LUO Jun,CHEN Jian-jun.Influence of Charge Mixture and Homogenization Treatment on the Microstructure and Properties of As-cast Zinc-aluminum Alloy[J].Foundry Technology,2008,29(12).
Authors:WANG Xiao-jiang  TIAN Guang-ping  WANG Yi-xiang  LUO Jun  CHEN Jian-jun
Abstract:The effect of entire new chasge and the half new charge mixture on microstructure and mechanical properties of zinc-aluminum casting was studied by means of SEM and EDS,and their microstructure and chemical composition of as-cast alloy were compared with those of Zn-Al alloys after homogenization treatment the results show that the Zn-Al alloy produced by the entire new charge has more uniform microstructure and better mechanical properties than those of Zn-Al alloy produced by half new and scrap charge mixture.Under the same conditions,The Zn-Al alloy after homogenization treatment has better combined properties than as-cast Zn-Al alloy.
Keywords:Zinc-aluminum cast alloy  Charge mixture  Homogenization treatment  Microstructure
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号