| 搅拌摩擦焊缝变入射角超声检测方法研究 |
| |
| 引用本文： | 刘松平,刘菲菲,李乐刚,郭恩明,王瑞川.搅拌摩擦焊缝变入射角超声检测方法研究[J].无损检测,2006,28(5):225-228,236. |
| |
| 作者姓名： | 刘松平 刘菲菲 李乐刚 郭恩明 王瑞川 |
| |
| 作者单位： | 北京航空制造工程研究所,北京,100024 |
| |
| 基金项目： | 国家规划总装备部预研项目 |
| |
| 摘 要： | 研究采用变入射角超声反射法解决搅拌摩擦焊缝区不同取向缺陷的无损检测。通过计算分析超声波在焊缝区的声波入射角、缺陷取向和缺陷紧贴性对声波反射影响，确定入射声波的角度变化范围，通过改变入射角，获取入射声波在缺陷处的最佳声学反射方向，提高入射声波对不同取向缺陷的检出能力。检测结果表明，该法可以有效地检出铝合金搅拌摩擦焊缝区不同取向焊接缺陷，是解决搅拌摩擦焊缝区微细和紧贴型缺陷无损检测的一种可行的方法。
|
| 关 键 词： | 超声检测 搅拌摩擦焊 变入射角反射 |
| 文章编号： | 1000-6656（2006）05-0225-04 |
| 收稿时间： | 2005-07-20 |
| 修稿时间： | 2005-07-20 |
Investigation of Ultrasonic Method Based on Different Incident Angles for Evaluation of Friction Stir Welding |
| |
| LIU Song-ping,LIU Fei-fei,LI Le-gang,GUO En-ming,WANG Rui-chuan.Investigation of Ultrasonic Method Based on Different Incident Angles for Evaluation of Friction Stir Welding[J].Nondestructive Testing,2006,28(5):225-228,236. |
| |
| Authors: | LIU Song-ping LIU Fei-fei LI Le-gang GUO En-ming WANG Rui-chuan |
| |
| Abstract: | A new ultrasonic method,which is based on reflection of spotfocused beam with different incident angles,for evaluation of defects in aluminum alloy friction stir welding(FSW) has been investigated.The relationship of incident angles,possible defect directions and thickness of defects in FSW with reflective coefficient has been used to analyze and estimate scanning incident angle range of probe beam.The optimum ultrasonic reflection direction can be obtained during the scanning of incident angles.It is helpful to improve detectability of defects in FSW.The experimental results presented have shown that ultrasonic evaluation based on multiple-incident angles has potential usage in nondestructive inspection of FSW. |
| |
| Keywords: | Ultrasonic inspection Friction stir welding Multiple-incident reflection |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
