Study on the Liquefaction Properties of Silt at Yellow River Delta

The seabed of the Yellow River Delta is formed by the rapid deposition of sediments from the Yellow River. Recent researches have shown that the geological hazards in the Yellow River Delta are mainly related to the liquefaction of silty seabed under cyclic loading. In this paper, based on the theory of Stokes Viscous Principle, a self-design dragging ball apparatus was used to study the fluid characteristics of liquefied and post-liquefied silt more thoroughly. Wave flume and shaking table were used to apply wave loads and vibration loads. The pore pressure, earth pressure, and moving parameters of the dragging ball were recorded during tests. The effect of cyclic loads and excess pore pressure ratio on viscosity of silty soil is discussed. The constitutive model of flow characteristics of liquefied silt is also established. The results indicate that the apparent viscosity of silty soil is much higher than sand. Cyclic loads accelerated the process of silt liquefaction, resulting in the decrease in apparent viscosity. The excess pore pressure ratio (r_u) has effect on silt liquefaction. When the soil had not reached the completely liquefied state (r_u < 1), the apparent viscosity decreased with the increase of excess pore pressure ratio; when the soil had reached the completely liquefied state (r_u = 1), the shear stress decreased with the increase of strain rate. It was determined that silty soil characterized by shear thinning can be viewed as a type of non-Newtonian fluid. The equation of the shear stress and shear strain rates was established by fitting the test data.