首页 | 官方网站   微博 | 高级检索  
     

V-Ti-Fe储氢合金的真空精炼
引用本文:王斌,杜金晶,刘奎仁,朱军,李林波. V-Ti-Fe储氢合金的真空精炼[J]. 有色金属(冶炼部分), 2015, 0(6): 67-71
作者姓名:王斌  杜金晶  刘奎仁  朱军  李林波
作者单位:西安建筑科技大学,西安建筑科技大学,东北大学,西安建筑科技大学,西安建筑科技大学
基金项目:国家自然科学基金资助项目(51404183);陕西省教育厅专项(14JK1425)
摘    要:采用真空感应炉对金属热还原法制备的V-Ti-Fe合金进行精炼,考察金属铈对精炼效果的影响。结果表明,铈可有效脱除合金中的氧杂质,减少合金内的富钛相和硅偏聚相,降低合金的成分偏析,促进合金的吸氢活化。随铈用量的增加,脱氧效果也逐渐增强,储氢容量得到提升,当铈添加量达到合金用量的5%时,氧含量降到了0.05%,最大吸氢量和有效放氢量分别达到3.36%和1.85%。

关 键 词:V-Ti-Fe合金  真空精炼  杂质  成份偏析  储氢容量
收稿时间:2015-01-15
修稿时间:2015-01-23

Vacuum Refining of V-Ti-Fe Hydrogen Storage Alloy
Wang bin,Du jin-jing,Liu kui-ren,Zhu jun and Li lin-bo. Vacuum Refining of V-Ti-Fe Hydrogen Storage Alloy[J]. Nonferrous Metals(Extractive Metallurgy), 2015, 0(6): 67-71
Authors:Wang bin  Du jin-jing  Liu kui-ren  Zhu jun  Li lin-bo
Abstract:V-Ti-Fe alloy prepared by metal thermal reduction was refined in vacuum induction furnace. The effect of Ce metal on refining effect was investigated. The results show that addition of Ce can effectively remove oxygen impurity in alloy, reduce componential segregation and improve hydrogen storage capacity of alloy. Deoxidization degrees and hydrogen storage capacity rise gradually with adding of Ce. When m(Ce)/m(alloy) is up to 5%, oxygen content drops to 0.05%, and the maximum hydrogen absorption capacity and effective hydrogen desorption capacity are up to 3.36% and 1.85%, respectively.
Keywords:V-Ti-Fe alloy   vacuum refining   impurities   composition segregation   hydrogen storage capacity
本文献已被 CNKI 等数据库收录!
点击此处可从《有色金属(冶炼部分)》浏览原始摘要信息
点击此处可从《有色金属(冶炼部分)》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号