|
|||||
|
|
| 触变成形AZ91D合金的组织及磨损性能的研究 | |
| 引用本文： | 陈体军,李元东,马颖,郝远,喇培清. 触变成形AZ91D合金的组织及磨损性能的研究[J]. 铸造技术, 2005, 26(9): 779-781 |
| 作者姓名： | 陈体军 李元东 马颖 郝远 喇培清 |
| 作者单位： | 1. 兰州理工大学甘肃省有色金属新材料重点实验室,甘肃,兰州,730050;中国科学院兰州化学物理研究所固体润滑国家重点实验室,甘肃,兰州,730000 2. 兰州理工大学甘肃省有色金属新材料重点实验室,甘肃,兰州,730050 3. 中国科学院兰州化学物理研究所固体润滑国家重点实验室,甘肃,兰州,730000 |
| 摘 要： | 研究了触变成形AZ91D镁合金的组织和磨损性能.结果表明,触变成形AZ91D合金长方体零件的组织并不均匀:在纵向远离内浇道的区域和在横向远离中心的部位初生相颗粒分数略有减小;在往复式磨损实验中,随着往复次数的增加,磨损率先急剧增加,最后趋于常数,随着载荷和往复频率的增加,磨损率则一直呈增大趋势;与金属型铸造相比,触变成形能显著提高耐磨性. |
| 关 键 词： | AZ91D镁合金 触变成形 组织 耐磨性 |
| 文章编号： | 1000-8365(2005)09-0779-03 |
| 修稿时间： | 2005-02-08 |
Microstructure and Wear Resistance of Thixoformed AZ91D Alloy |
|
| CHEN Ti-jun,LI Yuan-dong,MA Ying,HAO Yuan,LA Pei-qing. Microstructure and Wear Resistance of Thixoformed AZ91D Alloy[J]. Foundry Technology, 2005, 26(9): 779-781 | |
| Authors: | CHEN Ti-jun LI Yuan-dong MA Ying HAO Yuan LA Pei-qing |
| Abstract: | The microstructure and wear resistance of thixoformed AZ91D alloy were investigated. The results indicated that the microstructure of thixoformed cuboid component was inhomogeneous, the primary particles fraction decreased as the distance increased from the inner gate zone along the longitudinal direction and from the center zone along transverse direction. During the reciprocate friction testing, the wear rate first increased sharply, and then tended to a constant, while the wear rate continuously increased with the increasing of load or reciprocate frequency. The thixoforming process could significantly improve the wear resistance comparing with the conventional permanent mould casting. |
| Keywords: | AZ91D magnesium alloy Thixoforming Microstructure Wear resistance |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |
