Abstract: | AbstractThe residual welding stresses in laser beam (LB) and tungsten inert gas (TIG) weldments of a titanium alloy in thin plate form were investigated experimentally in the present work. A hole drilling technique was used to measure the residual stresses in the weldments. The effects of the welding method and post-weld heat treatment (PWHT) on the residual stresses were analysed. The results show that (i) the residual stress distribution in the LB welded joints is similar to that obtained for traditional fusion welding processes, although the distribution zone is much narrower in LB welding, (ii) the residual stress in the heat affected zone for LB welding is about 100 MPa lower than that for TIG welding, and (iii) PWHT in vacuum greatly relieves the welding residual stress. |