Electrochemical oxidation of an acid dye by active chlorine generated using Ti/Sn(1−x)IrxO2 electrodes

The generation of active chlorine on Ti/Sn_(1−x)Ir _x O₂ anodes, with different compositions of Ir (x = 0.01, 0.05, 0.10 and 0.30 ), was investigated by controlled current density electrolysis. Using a low concentration of chloride ions (0.05 mol L⁻¹) and a low current density (5 mA cm⁻²) it was possible to produce up to 60 mg L⁻¹ of active chlorine on a Ti/Sn_0.99Ir_0.01O₂ anode. The feasibility of the discoloration of a textile acid azo dye, acid red 29 dye (C.I. 16570), was also investigated with in situ electrogenerated active chlorine on Ti/Sn_(1−x)Ir _x O₂ anodes. The best conditions for 100% discoloration and maximum degradation (70% TOC reduction) were found to be: NaCl pH 4, 25 mA cm⁻² and 6 h of electrolysis. It is suggested that active chlorine generation and/or powerful oxidants such as chlorine radicals and hydroxyl radicals are responsible for promoting faster dye degradation. Rate constants calculated from color decay versus time reveal a zero order reaction at dye concentrations up to 1.0 × 10⁻⁴ mol L⁻¹. Effects of other electrolytes, dye concentration and applied density currents also have been investigated and are discussed.