Thermal properties,rheology and sintering of ultra high molecular weight polyethylene and its composites with polyethylene terephthalate

The addition of polyethylene terephthalate (PET) fibers in ultra high molecular weight polyethylene (UHMWPE) may be a promising approach to achieve improved wear properties in artificial joints. Since UHMWPE/PET composites are processed by compression molding, which involves compaction and sintering of polymeric powders, this article investigates their rheology, thermal properties, and sintering behavior to aid in the identification and selection of optimum processing conditions. Isothermal crystallization kinetics studies have revealed that crystallization of UHMWPE proceeds via heterogeneous nucleation and is governed by two‐dimensional growth. The crystallization rates of the composites were lower than those of the neat material, whereas their ultimate crystallinities were higher. The UHMWPE/PET composites had higher viscosity and elasticity than the neat resin. In the presence of PET fibers the onset of sintering took place at higher temperatures but proceeded at substantially higher rates as compared with pure UHMWPE. A marked discrepancy between the Eshelby‐Frenkel model and experimental sintering data suggests that viscous flow is not the prevailing mechanism for coalescence but rather that enhanced surface area, attributed to the highly developed internal morphology of UHMWPE particles, is the controlling factor. POLYM. ENG. SCI., 45:678–686, 2005. © 2005 Society of Plastics Engineers