| 高速贴标机进瓶螺旋的设计与造型 |
| |
| 引用本文： | 李晋芳,杨栓虎,何汉武,翁纪钊. 高速贴标机进瓶螺旋的设计与造型[J]. 轻工机械, 2007, 25(4): 98-101 |
| |
| 作者姓名： | 李晋芳 杨栓虎 何汉武 翁纪钊 |
| |
| 作者单位： | 广东工业大学,机电工程学院,广东,广州,510006;山西省晋城煤业集团,山东,晋城,048000 |
| |
| 基金项目： | 广东省自然科学基金;广东省自然科学基金 |
| |
| 摘 要： | 将高速贴标机进瓶螺旋设计为变螺距三段式螺旋,以50000瓶/h的机型为例进行了计算,首先为等速段,然后通过变加速段解决加速度突变带来的冲击,最后为等加速段。给出了利用Matlab绘制的进瓶螺旋运动曲线,提出了用Matlab编程计算螺旋槽上的点,结合SolidWorks实现进瓶螺旋三维造型的方法。
|
| 关 键 词： | 高速贴标机 进瓶机构 进瓶螺旋杆 三维造型 |
| 文章编号： | 1005-2895（2007）04-0098-04 |
| 修稿时间： | 2007-02-26 |
Designing and Modeling for Infeeding Screw of High-speed Labeling Machine |
| |
| LI Jin-fang,YANG Shuan-hu,HE Han-wu,WENG Ji-zhao. Designing and Modeling for Infeeding Screw of High-speed Labeling Machine[J]. Light Industry Machinery, 2007, 25(4): 98-101 |
| |
| Authors: | LI Jin-fang YANG Shuan-hu HE Han-wu WENG Ji-zhao |
| |
| Affiliation: | 1.Faculty of Mechanical and Electronic Engineering,Guangdong University of Technology,Guangzhou 510006,China;2.Jincheng Anthracite Mining Group,Jincheng 048000,China |
| |
| Abstract: | Taking the labeling machine with speed of 5000 bottles labeled per hour as study target,the infeeding screw rod is designed into three segments.The bottle velocity is constant at the first segment.Then the velocity is changed with varying acceleration at the second segments,which decreases the impact caused by the acceleration.The velocity is changed with constant acceleration at the final segment.The movement curve of the infeeding screw rod is drawn within Matlab.A method is proposed to make 3D model of infeeding screw rod with Solidworks,and the parameters for modeling are gotten from the result calculated by Matlab. |
| |
| Keywords: | High-speed labeling machine infeeding(bottles) mechanism infeeding(bottles) screw rod 3D modeling |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
