| 基于三维有限元模拟的聚合物复合型材共挤出过程分析 |
| |
| 引用本文： | 张敏,黄传真,孙胜,贾玉玺.基于三维有限元模拟的聚合物复合型材共挤出过程分析[J].高分子材料科学与工程,2009(10). |
| |
| 作者姓名： | 张敏 黄传真 孙胜 贾玉玺 |
| |
| 作者单位： | 山东大学机械工程学院;山东大学模具工程技术研究中心; |
| |
| 基金项目： | 国家自然科学基金资助项目(50403009); 山东省博士后创新基金(200701009)资助项目 |
| |
| 摘 要： | 建立了两种聚合物熔体在圆柱形流道中共挤出流动的三维数值计算模型,采用有限元方法数值模拟了复合棒材(LDPE/PS)的共挤出成形过程,并对共挤出界面的形状、入口与出口的速度、流动过程的压力降以及入口流量对界面的影响等进行了分析。结果表明,在对接棒材的共挤出过程中,当入口流量相同时,共挤出界面偏向低黏度熔体一侧;入口流量较小的变化即引起共挤出界面的形状与位置较大的变动,在对接棒材的成形过程中为获得稳定的流动,须严格控制入口流量的变化。最后将数值计算得到的界面与实验结果进行了对比,表明数值计算的结果与实验结果是一致的。
|
| 关 键 词： | 广义牛顿流体 共挤出 有限元模拟 复合型材 |
The Analysis of Polymer Profile Coextrusion Processes Based on the Three-Dimensional Finite Element Simulation |
| |
| ZHANG Min,HUANG Chuan-zhen,SUN Sheng,JIA Yu-xi.The Analysis of Polymer Profile Coextrusion Processes Based on the Three-Dimensional Finite Element Simulation[J].Polymer Materials Science & Engineering,2009(10). |
| |
| Authors: | ZHANG Min HUANG Chuan-zhen SUN Sheng JIA Yu-xi |
| |
| Affiliation: | ZHANG Min1,HUANG Chuan-zhen1,SUN Sheng2,JIA Yu-xi2(1.School of Mechanical Engineering,Shandong University,2.Mould & Die Engineering Research Center,Jinan 250061,China) |
| |
| Abstract: | The three-dimensional numerical simulation model of two polymer flowing through the column path was founded.The coextrusion process of joint club(LPDE/PS) was simulated used the finite element method.Such simulated results as the interfacial offset and shape,the velocity profile of inflow and outflow,the pressure dropped data and the effect of inflow flux to the interface were analyzed.It is found that the interface is lean to the polymer that has lower viscosity when the inflow flux is same.The difference ... |
| |
| Keywords: | generalized newtonian fluid coextrusion finite element simulation multiplex profile |
| 本文献已被 CNKI 等数据库收录！ |
|
